Advertisement
To avoid risk of personal injury, equipment damage, fire & shock, make sure work area
has the following conditions:
Floor is dry. Damp, wet or rainy conditions can cause operator to slip.
Operator must be of sufficient age to operate vise in a safe condition.
Well Lit.
Clean and unobstructed.
Workbench is properly secured to floor or wall.
Workbench is designed sufficiently to handle vise and work load (torque placed
upon the vise and workbench).
Mount Vise To Your Drill Press
Secure the Drill Press Vise to the drill press table. There are different styles of
tables requiring varying methods of securing the vise. Consult your drill press
operator's manual for recommended securing method.
Vise Operation
Make sure vise selection (size and type) is appropriate for use and application. Larger
vises are readily available through Yost Vises. Never force or use cheater bars, pipe
extensions on the screw handle of the vise as this places excessive pressure on the vise
components and they may fail resulting in severe bodily injury.
Step 1: Make sure vise is securely mounted to the workbench.
Step 2: Make sure the swivel base lockdowns are secure.
Step 3: Open the vise by turning the vise handle counterclockwise. Do not open
beyond the vises rated capacity (jaw opening).
Step 4: Place item between the jaws of the vise.
Step 5: Close the vise by turning the vise handle clockwise until the item is snug
between the serrated jaws.
Step 6: Continue to tighten the screw handle until you can no longer move (twist) the
clamped item. Do not over tighten as this may damage item and / or the vise.
Step 7: When finished working on the item, slowly turn screw handle counterclockwise
to release the item.
Advertisement
