Advertisement
Thank you for purchasing this CLARKE Right Angle Drill Attachment.
Please read this instruction leaflet thoroughly and follow the instructions carefully,
in doing so you will ensure the safety of yourself and that of others around you, this
will also ensure that the Right Angle Drill Attachment will give you long and
satisfactory service.
Please keep these instructions in a safe place for future reference.
This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as proof
of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which is was
intended.
Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
TECHNICAL SPECIFICATION
Chuck capacity ......................................................................... 1mm - 10mm
Drive Spindle Width .................................................................................. 9mm
SETUP AND SAFETY PRECAUTIONS
•
Insert and secure a drill bit into the chuck, attach a drill/drive to the drill
attachment drive spindle.
•
NEVER use with a drill in 'hammer' mode.
Chuck ............................................................................................. SURAD1001
Chuck Securing Screw ................................................................. SURAD1002
Chuck Key ..................................................................................... SURAD1003
Chuck Removal Spanner ............................................................. SURAD1004
For spare parts and servicing, please contact your nearest dealer, or CLARKE International on:
CLARKE International, Hemnall Street, Epping, Essex, CM16 4LG
CLARKE GUARANTEE
PARTS LIST
020 8988 7400
or email:
Parts@clarkeinternational.com
Service@clarkeinternational.com
Advertisement
