Advertisement
1. Appearance Description for PoE WLAN Bridge
1. Front/Right side Panel
- The Right side panel has the 2-Button and Front panel has
status LEDs in the following figure.
CAMERA
POWER
WLAN
Fig 1. Front/Right side View
Copyrightⓒ. 2019. All Rights Reserved.
Button
WPS
RESET
LED
POWER
WPS
RESET
WLAN
CAMERA
1 / 5
Description
• To connect WPS to AP(Access Point)
• Reboot
• Reset to Factory Default
Description
• Solid White : Power on
• Off : Power is not supplied to the PoE WLAN Bridge
• Solid White : WLAN Activity are in process
• Blinking White : Wireless data is being sent or received.
• Solid Red : WLAN is accessing or access is fail
• Blinking Red : The Wireless signal is weak signal
• Off : WLAN is not used
• Solid White : CAMERA link is detected
Data Transmission on the port
• Off : No data transmission
Table 1. Button/Led Description
Advertisement
