Gigabyte B460M DS3H V2 User Manual page 15

7) QFLASH_PLUS (Q-Flash Plus Button)
Q-Flash Plus allows you to update the BIOS when your system is off (S5 shutdown state). Save the latest
BIOS on a USB thumb drive and plug it into the dedicated port, and then you can now flash the BIOS
automatically by simply pressing the Q-Flash Plus button. The QFLED will flash when the BIOS matching
and flashing activities start and will stop flashing when the main BIOS flashing is complete.
QFLED
QFLASH_PLUS
For how to use Q-Flash Plus please visit the "Unique Features" webpage of GIGABYTE's website.
8) SATA3 2/3/4/5 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel
RAID 1, RAID 5, and RAID 10. Refer to Chapter 3, "Configuring a RAID Set," for instructions on configuring
a RAID array.
7 7
SATA3
1 1
SATA3
7 1
7 1
To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Settings\IO Ports\
SATA And RST Configuration," for more information.
Pin No. Definition
1 GND
3 2
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
5
7 GND
4
- 15 -
Chipset supports RAID 0,
®