Fagor 3FE-8212 Instruction Manual page 99

FIRST WASH
Before washing for the first time, put the appliance through one high temperature cycle
without a load, according to the following procedure:
1). connect the washing machine to the power supply,
2). open the water valve,
3). set the programme selector dial to washing at high temperature, add a suitable
detergent and press Start/Pause.
SOIL
Stubborn stains
1
Before washing underwear, apply an additional stain remover according to
the instructions for use.
Heavy soil
2
in order to achieve a better result, wash less laundry,
add more detergent.
Rinse the washing machine after washing heavily soiled garments (e.g. work
clothes) or clothing that loses fibres. To do this, run the wash cycle at 60°C, for
example Cotton or Synthetics without any load.
Light soil
3
See Conservation.
CONSERVATION
Reduce energy and water consumption
Garments which are only lightly soiled should be washed on the Rapid Wash setting.
For most programmes, the washing machine detects load.
For partial load, when using the Cotton programme, the appliance will reduce water and energy
consumption and shorten the wash cycle.
The most energy and water efficient wash programmes are generally those that run at lower
temperature and for a long time.
Loading the washing machine to the full capacity indicated by the manufacturer for the respective
wash programmes will save energy and water.
99