VAST DWS-1113 User Manual

DWS-1113 WiFi Station

Specification

Compatible Host Devices
Support UVC camera video stream format
Camera operational range
Frequency
Access format
Transmission protocol
Battery
Adapter
Power consumption
Continuous operation time
Weight

Contents

DWS-1113 WiFi Station x1
Power adapter x1
User Guide x1

Components Names and Function

WiFi Dongle
Reset Key
Power Switch
Power Bank
Apple iOS devices / Android devices
Motion JPEG
about 10M from a WiFi connector device
2.4GHz band width
Ad hoc mode
WiFi IEEE802.11b/g/n(1T1R)
Li-Polymer 3000mA
5V/2000 mA
3.7V/370mA(battery),5V/900mA(DC in)
5V/200mA(WiFi Dongle)
3.5 hrs with 3000mA Li-Polymer battery
170.2g with Battery
USB MJPEG Camera INPUT
LAN Port (For Firmware update)
Micro USB (For Charge)
1
Pad Holder For Use

LED Indicators

WiFi Dongle
Green: Power on and working.
Power Bank
Green: Normal with sufficient charge, or charging is complete
Blinking Red: Low battery. Please plug in power adapter or WiFi Station will be off after 60 seconds.
Orange: Battery is charging.

Getting started

1. Download the "S-Viewer" app from Apple App Store or Android "Google Play".
2. Turn on the power switch. WiFi Dongle LED will stay GREEN.
3. Connect your USB Microscope or USB camera to DWS-1113 WiFi Station.
4. Connect the mobile device to the WiFi network. (Please see the section on iOS/Android app operation)

iOS app operation

1. Go to WiFi setting and choose WiFi setup
2. Select WiFi, and turn it on.
3. Select WiFi Station "SSID"
4. Key in the password. Connection is established.
5. Go back to main menu.
6. Find and hit the S-Viewer icon to access WiFi Station's features.
Remark:
The initial SSID can be found on the label located on the bottom of the device.
The initial password is 12345678.
Power Bank LED
WiFi Dongle LED
2