Restarting The Air Conditioner Automatically; Using The Mode Function - LG PC24SK Owner's Manual

Restarting the Air Conditioner
Automatically
When the air conditioner is turned on again
after a power failure, this function restores the
previous settings.
Disabling Auto Restart
1
Open the front cover (Type2) or horizontal
vane (Type1).
2
Press the ON/OFF button and hold it for 6
seconds, then the unit will beep twice and
the lamp will blink twice 4 times.
• To re-enable the function, press the ON/
OFF button and hold it for 6 seconds. The
unit will beep twice and the lamp will blink
4 times.
Type1
Type2
NOTE
• The feature may be changed according to the
type of model.
• If you press and hold the ON/OFF button for 3
– 5 seconds, instead of 6 seconds, the unit
will switch to the test operation. In the test
operation, the unit blows out strong cooling air
for 18 minutes and then returns to factory
default settings.
18
ON/OFF
ON/OFF

Using the Mode Function

This function allows you to select the desired
function.
Cooling Mode
Auto Changeover Mode / Auto
Operation(AI) Mode
Dehumidification Mode
Heating Mode
Fan Mode
Cooling Mode
1
Turn the appliance on.
2
Press Mode button repeatedly to select the
Cooling Mode.
• is displayed on the display screen.
3
Press or
temperature.
button to set the desired
EN