Advertisement
en Childproof lock
5.4 Information on the hotplates
Dark areas in the glow pattern of the hotplate are part
of the technical design. They do not affect the function-
ality of the hotplate.
The hotplate regulates the temperature by switching the
heat on and off. The heat may also switch on and off
when at the highest setting.
Reasons:
¡ Easily damaged components are protected against
overheating.
¡ The appliance is protected against electrical over-
load.
5.5 Setting the hotplates
To set a hotplate, it has to be selected.
Heat setting
1
Lowest setting
9
Highest setting
5.6 Selecting heat settings
Requirement: The hob is switched on.
6 Childproof lock
You can use the childproof lock to prevent children
from switching on the hob.
6.1 Activating the childproof lock
Requirement: The hob is switched off.
Simultaneously press and hold
▶
4 seconds.
7 Basic settings
You can configure the appliance to meet your needs.
7.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis-
Selection
play
Automatic childproof lock
– Switched off
– Switched on
– Manual and automatic childproof lock are
switched off.
1
Factory setting
6
and
for approx.
1
Select the hotplate with
1.
a
lights up in the heat setting indicator.
Within the next 10 seconds, touch
2.
The basic setting appears.
–
Heat setting 9
–
Heat setting 4
5.7 Changing heat settings
Select the hotplate with
1.
Touch
or
until the required heat setting ap-
2.
pears.
5.8 Switching off the hotplate
There are 2 ways to switch off the hotplate.
Touch
twice.
1.
appears in the heat setting indicator.
a
a After approx. 10 seconds the residual heat indicator
appears.
Select the hotplate and touch
2.
pears on the heat setting indicator.
a After approx. 10 seconds the residual heat indicator
appears.
Note: The hotplate last selected remains activated. You
can adjust the hotplate without selecting it again.
lights up for approx. 10 seconds in the heat set-
a
ting indicators.
a The hob is locked.
6.2 Deactivating the childproof lock
Simultaneously press and hold
▶
4 seconds.
a The lock is released.
Dis-
Selection
play
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.
1
Factory setting
.
or
.
.
or
until
ap-
and
for approx.
1
Advertisement
