UIS WPC-110 User Manual

Wireless power controller

Wireless Power Controller User's Manual

Product Name: Wireless Power Controller

Model No: WPC-110

Input Power: AC110V 50/60Hz

Features Description:

1. The way to a wireless receiver by the WG-110 (Wireless Gateway) issued to the ON / OFF

signal to control the WPC-110 (Wireless Power Controller) on a Power outlet, control power

supply , you can phone from a distance through remote control home electrical equipment, to

provide users more convenience.

2. Can use the WCS-110 (Wireless Contact Sensor) or WMS-110 (Wireless Motion (PIR)

Sensor) to do even control, For example: Corridor night auxiliary lighting.

3. Easy to install, Play as long as you can in the power outlet.

4. Can be a positive and transparent operation of the button panel to control the WPC-110

(Wireless Power Controller) for power outlet of ON or OFF state, and bright blue LED lights

that action.

5. Easy link, when install at the first time to press the set button on the side of product binding

with repeater.

Table of Contents

Do you have a question about the WPC-110 and is the answer not in the manual?

Page 1 3. Easy to install, Play as long as you can in the power outlet. 4. Can be a positive and transparent operation of the button panel to control the WPC-110 (Wireless Power Controller) for power outlet of ON or OFF state, and bright blue LED lights that action.
Page 2 5. America power plug Installation Hints: 1. First WPC-110 (Wireless Power Controller) play in the City electric power outlet, press the WPC-110 (Wireless Power Controller) side of the SET button, and then press the WR-110 (wireless repeater) at the bottom of the SET button, Wait for 30 seconds to 1 minute. If LED indicator light flash three times that means linking success.
Page 3 WPC-110 (Wireless Power Controller). Wireless connects in non-camouflage straight line effective range 10 meters. May pull closer between booth's distance tests to have a look first, whether to have the improvement segment condition. Specification: Wireless Power Controller Model No.
Page 4 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.