Page 5
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
Page 6
Education Sharing System User Manual TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
Page 7
Education Sharing System User Manual Regulatory Information EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
Page 8
Applicable Models This manual is applicable to the models listed in the following table. Product Name Model Education Sharing System DS-9604LNI-V/B02 Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text.
Page 9
Education Sharing System User Manual Safety Instructions Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
Page 10
Education Sharing System User Manual Preventive and Cautionary Tips Before connecting and operating your device, please be advised of the following tips: The device is designed for indoor use only. Install it in a well-ventilated, dust-free environment without liquids. ...
Education Sharing System User Manual Chapter 1 Introduction and Installation Indecator Description The device has an indicator at the lower-right corner of the front panel. The indicator indicates different working status of your device. Indicator Description Indicator Status Description Unlit The device is shut down.
Education Sharing System User Manual Wall-Mounted Installation Standing Installation Before you start: Prepare suitable installation tools, including screwdrivers. Take out the accessories from the device package. Align the standing bracket holes with the device (as the direction shown in the following figure).
Page 13
Education Sharing System User Manual Standing Installation...
Education Sharing System User Manual Chapter 2 Start-up Startup and Shutdown Proper startup and shutdown procedures are crucial to expanding the life of the device. Follow the steps to start your device. Startup Connect the device and a socket with the provided power cord. It is HIGHLY recommended that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.
Education Sharing System User Manual Connect Directly Connect via a Switch or a Router Activate Your Device Default User Name and IP Address Default administrator account: admin. Default IPv4 address: 192.168.1.64. Activate via Local Menu For the first-time access, you have to set an admin password to activate your device. No operation is allowed before activation.
Education Sharing System User Manual You can get access to the device via web browser. The supported resolutions include 1024*768 and above. Open web browser, input the device IP address. The default IP address is 192.168.1.64. Press Enter. Enter the admin password twice. STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the...
Education Sharing System User Manual Activate via SADP Create and input the new password in the password field, and confirm the password. STRONG PASSWORD RECOMMENDED–We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product.
Education Sharing System User Manual Set Working Mode as Net Fault-Tolerance, Load Balance, or Multi-Address. Net-fault Tolerance Mode: The two NIC cards use the same IP address, and you can select the Main NIC to any LAN. By this way, in case of one NIC card failure, the system will automatically enable the standby NIC card so as to ensure the normal running of the whole system.
Page 19
Education Sharing System User Manual Basic Network Settings Select Working Mode as Net Fault-Tolerance, Load Balance, or Multi-Address. Net-fault Tolerance Mode: The two NIC cards use the same IP address, and you can select the Main NIC to any LAN. By this way, in case of one NIC card failure, the system will automatically enable the standby NIC card so as to ensure the normal running of the whole system.
Education Sharing System User Manual SADP Search Purpose: You can search and modify network parameters of IP cameras in the same network segment. Go to Configuration > System Settings > Camera Management > SADP Search. Click Refresh to search the IP camera in the same network segment. Optionally, edit the network parameters of IP camera.
Education Sharing System User Manual Education Specified Camera Connection Before you can get the live view or record the image of classroom, connect the education specified camera to the device via PoE (Poser over Ethernet) interface or network. Connect Network Camera via PoE Interface Purpose: PoE provides power to a network camera via the same cable as used for the network connection.
Education Sharing System User Manual Camera type cannot be duplicated with each other. Connect via Network Before you start: Connect the education specified camera to network. Go to Configuration › Recording Settings › Live View Settings › Live View Channel Settings via web browser.
Education Sharing System User Manual Wizard Configuration Purpose: The wizard is used to quickly view system information and configure system main parameters. Go to Configuration › Wizard Configuration › Step 1 via web browser. System Info: View the device model, software version, and connected PoE camera information.
Education Sharing System User Manual Chapter 3 Live View Live View via Web Browser Purpose: You can view the live image of connected cameras with manual, semi-auto, or auto mode. Before you start: Ensure the device has successfully connected to the education specified cameras, and your web browser has installed the latest web component.
Page 25
Education Sharing System User Manual View Mode View Mode Description Mode Icon Description Movie Single screen PIP 1, overlay the picture at the lower right corner Picture-in-Picture PIP 1, overlay the picture at the lower left corner Multi-Screen 1, split screen in half Multi-Screen 2, split screen in three blocks with the larger one at left side Multi-Screen 3, split screen in three blocks with the...
Education Sharing System User Manual Course Information Optionally, select the live mode as Manual, SimiAuto, or Auto. Manual: Manually switch the camera image to the main screen. You can double-click the camera image at the bottom to switch image, or use the PTZ control panel to manually track the object.
Education Sharing System User Manual Live View via Local Menu Optionally, select the live mode as Manual, or Auto. Manual: Manually swith camera image to the main screen. You can tap the camera image at the bottom to switch. ...
Education Sharing System User Manual Go to Configuration > System Settings > System Settings > RS-485 via web browser. PTZ Settings Select the camera for PTZ setting in Channel No. Set the PTZ camera parameters. All the parameters should be the same as the PTZ camera parameters. Click Save to save the settings.
Education Sharing System User Manual Select a Preset Repeat the above steps to set more presets. Call Presets Purpose: This feature enables the camera to point to a specified position such as a window when an event takes place. Go to Live View via web browser. And start live view of a channel. Click PTZ at the upper right corner.
Education Sharing System User Manual Chapter 4 HDD Management Format Hard Disk Purpose: A newly installed hard disk must be formatted before it can be used by your education sharing system. Go to Configuration > System Settings > Storage Management > HDD Management via web browser.
Education Sharing System User Manual Set Cloud Storage Purpose: The cloud storage allows you to get alarm pictures from the device. Go to Configuration > System Settings > Storage Management > Cloud Storage via web browser. Check Enable Cloud Storage. Set the related parameters.
Education Sharing System User Manual Schedule Settings Advanced Settings HDD Sleeping Purpose: To reduce consumption and extend hard disk’s lifespan, you can enable the hard disk sleep feature. The hard disk will turn into sleep status if it keeps idle for a period. Go to Configuration >...
Education Sharing System User Manual Chapter 5 Recording Settings Configure Recording Parameters via Local Menu The recording channels are configurable in System Settings > Record. The device Recording Channel is set to Live View Channel by default. You can choose to record multiple channel during live view as your desire.
Education Sharing System User Manual Only JPEG format pictures can be uploaded, and the resolution shall be between 352 × 288 and 1920 x 1080. Up to 11 pictures can be uploaded. Click OK. Optionally, you can click to deleted the picture.
Page 35
Education Sharing System User Manual Courseware Detection Select Channel No. for course detection. [A9] Computer and [A10] Computer refer to VEDIO IN 1 and VEDIO IN 2 at the rear panel respectively. Check Enable Course Detection. Click Draw Area to draw the detection area in the camera view. Click Stop Drawing when you finish drawing the detection area.
Education Sharing System User Manual Go to Configuration > Recording Settings > Courseware Settings > Input Source Configuration via web browser. Select Channel No. for input source. [A9] Computer and [A10] Computer refer to VEDIO IN 1 and VEDIO IN 2 at the rear panel respectively. Select Input Source.
Page 37
Education Sharing System User Manual displayed in the resource channel in the largest window of live view control view according to the set priority. You need to log in education specified speed dome configuration interface to configure its smart detection rules. Configure Live View Control View Go to Configuration >...
Page 38
Education Sharing System User Manual Live View Channel Settings Select a channel for modification. Click Modify. Strategy Configuration Interface Set the parameters, including priority, IP address, port, user name, password, etc. Priority: The priority of the selected channel. The larger the value is, the higher the priority will be.
Education Sharing System User Manual The device will automatically recognize supportable education specified cameras. If issues occur, contact the product distributor for help. Course Information Purpose: You can define the course number, course name, and course instructor. Go to Configuration > Courseware Settings > Course Settings > Course Information via web browser.
Education Sharing System User Manual Course Plan Click Save. RTMP Live Purpose: You can view the course live view image in RTMP server. The feature is turned off by default. Go to Configuration > System Settings > Network Settings > RTMP Live via web browser. RTMP Live Select Channel No.
Education Sharing System User Manual Check Enable to enable the RTMP live feature. Network camera supports push main stream and sub-stream. Edit Stream Type, RTMP URL, and Package Length. RTMP URL format: rtmp://192.168.1.64:1935/live/12345. 192.168.1.64 is the server IP address. 1935 is server port. Live is server name. 12345 is a custom name used to distinguish channels and stream types.
Education Sharing System User Manual Audio Volume Click More Configure > Advance Gain. Set the audio gain. Audio gain adjusts the input audio, after the adjustment, the mixed sound will be applied to the audio output at rear panel. The gain value ranges from 1 to 100. When it is set as 1, the audio gain reaches to the minimum, and when it is set as 100, it reaches to the minimum.
Page 43
Education Sharing System User Manual Publishing Configuration Enter the FTP server address, port, user name, and password. Click Set to select the publishing channel(s). Click OK. Set Publishing Channel Set Publishing Path. Optionally, check Auto Publishing to automatically publish courses. You can set Date Published as Last Course or Custom time for the course that requires to be published to FTP.
Education Sharing System User Manual The published course video format is MP4. Search Published Course Purpose: After course is published, you can search its publishing progress, publishing status, course introduction. Go to Configuration > System Settings > FTP Publishing > Published Course Search via web browser.
Education Sharing System User Manual Video Head/Tail Configuration Configure video head. 1) Check Enable under Video Head. 2) Enter Background Picture Index. The index No. is the background picture No. in the background settings interface. 3) Enter Display Duration for the background picture. 4) Click Save.
Education Sharing System User Manual Upload Logo Go to Configuration > Recording Settings > Auxiliary Settings > Logo Configuration via web browser. Click Browse to select the image path. Click Save. Display Logo Go to Configuration > Recording Settings > Auxiliary Settings > Logo Configuration via web browser.
Education Sharing System User Manual Chapter 6 Interaction Interaction Settings Account Management Purpose: You can manage your interactive meeting account in Account Management. Go to Configuration > Interaction Settings > Cloud Interactive Class > Account Management via web browser. Click Current Login Account to register the device (your device will log in automatically after registration.
Education Sharing System User Manual Default settings are recommended. If the default parameters are invalid, please contact the installer or technical support service. Configure Interactive Video Linkage Purpose: You can configure Interactive Video Linkage in the interaction view. Go to Configuration > Interaction Settings > Cloud Interactive Class > Interactive Video Linkage via web browser.
Education Sharing System User Manual View Configuration Select Network Mode. Auto Mode: If no view is provided by other recorder, default view mode would be single screen. Otherwise, it will add new view automatically and switch to multi-screen. Manual Mode: This mode shows multi-screen view and can match the interactive video with the required view.
Page 50
Education Sharing System User Manual Sending Channel Code Configuration Parameter Description Parameter Name Parameter Description Resolution Indicates image precision. The higher the resolution, the clearer the image. Variable Bitrate: Bitrate varies according to the scenarios. 6 levels of image quality are available. You can have higher usage of network bandwidth and Bitrate Type higher efficiency of storage space.
Education Sharing System User Manual The main stream parameters of the sending channels are only effective if configured in Sending Channel Encoding Settings but not in Audio/Video > Video Settings. Configure Sending Channel Purpose: You can configure the interactive image parameters, and the image will be sent to the interactive meeting.
Education Sharing System User Manual If the Sending Channel Mode is auto, the parameters can not be configured. The courseware channel and the broadcast channel are sent by default. Meanwhile, the main stream, video, audio and Stream Self-Adaption are applied by default. ...
Education Sharing System User Manual Overlay Interactive Alias Purpose: You can overlay interactive alias on the image of sending channels. Select Configuration > Interaction Settings > Cloud Interactive Class > Basic Settings > Interactive Alias Overlay via web browser. Check Enable and set Overlay Position. Interactive Course Data Counting Purpose: Course data counting is available.
Education Sharing System User Manual Interaction Operation The device supports multi-room interaction. You can preview the cloud interactive image via web browser or local menu, and control the device. Join/Initiate Interaction via Web Browser Before you start ● Configure interactive meeting parameters (Go to Configuration > Interaction Settings > Cloud Interactive Class via web browser).
Page 55
Education Sharing System User Manual More Control Interaction and Other Procedures Icon Description Remarks This function is only available when the view mode is ‘manual’ (Go to Configuration > Adjust view mode. Interaction Settings > Cloud Interactive Class > Interactive View). Go to Configuration >...
Page 56
Education Sharing System User Manual Icon Description Remarks the participant. Only available when video stream is enabled. Receive video stream. To receive or decline the audio and video sent by the participant. Ask question. The initiator can ask questions to the participant, when you go to Configuration >...
Education Sharing System User Manual Icon Description Remarks supports this function. Remove meeting. Remove other device from the interaction. If the interactive view prompts unstable network connection, please check and adjust the network enviornment. Join/Initiate Interaction via Local Menu Before you start ●...
Page 58
Education Sharing System User Manual Icon Description Display the recorded time. Enable/disable the microphone of participant. Display more options. Interact with the participant. For example, you can tap it to ask questions to the participant, and the participant would be able to speak (the microphone of participant would be enabled automaitcally).
Education Sharing System User Manual Chapter 7 Course Playback and Download Course Playback Play Back Course Videos via Local Menu Tap Course File. Locate the course video. Tap the video. Play Back Course Videos Via Local Menu to start playback. Optionally, tap the related video(s) at the right list, and play back the related videos.
Education Sharing System User Manual Playback Click Video. Select a channel in the left channel list. Set date and time. The day with mark means it has videos. Click Drag the time bar at the bottom, or click to adjust time. Click to start playback.
Education Sharing System User Manual Tap Export at the upper-right corner. Select the course videos or course video folders as your desire. Tap Export again. Select the backup device and folder path. Tap Save. Download Courses via Web Browser Go to Playback. Playback Click Set the search conditions.
Education Sharing System User Manual Chapter 8 Smart Settings Enable Class Statistics Data Purpose: You can count view and alarm information via the feature. By default, the feature is turned off. Go to Configuration > Smart Settings > Class Data via web browser. Check Enable Course Data Statistics.
Education Sharing System User Manual Chapter 9 Network Settings PPPoE Settings Purpose The device can access Internet via dialing up. Go to Configuration > System Settings > Network Settings > PPPoE via web browser. PPPoE Settings Check Enable PPPoE. Enter user name and password of your dial-up account. Click Save.
Page 65
Education Sharing System User Manual DDNS Settings Check Enable DDNS. Select DDNS Type as DynDNS, PeanutHull, or NO-IP. DDNS Type: DynDNS 1) Enter Server Address for DynDNS server. 2) Enter the domain obtained from the DynDNS website in Domain. 3) Enter user Name and password registered in the DynDNS website.
Page 66
Education Sharing System User Manual DDNS Type: PeanutHull 1) Enter the user Name and password obtained from the PeanutHull website. PeanutHull 2) Click Save to save the settings. DDNS Type: NO-IP 1) Enter Server Address for NO-IP. 2) Enter the domain obtained from the NO-IP website (www.no-ip.com) in Domain. 3) Enter the user name and password registered in the NO-IP website.
Education Sharing System User Manual Email Settings Purpose: The system can be configured to send an Email notification to all designated users if an alarm event is detected, etc., an alarm or motion event is detected or the administrator password is changed.
Education Sharing System User Manual NAT Settings Purpose: Two ways are provided for port mapping to realize the remote access via the cross-segment network, UPnP™ and manual mapping. UPnP Settings Universal Plug and Play (UPnP™) can permit the device seamlessly discover the presence of other network devices on the network and establish functional network services for data sharing, communications, etc.
Education Sharing System User Manual You can use the default port No., or change it according to actual requirements. External Port indicates the port No. for port mapping in the router. The value of the RTSP port No. should be 554 or between 1024 and 65535, while the value of the other ports should be between 1 and 65535 and the value must be different from each other.
Education Sharing System User Manual Setting Virtual Server Item The above virtual server setting interface is for reference only, it may be different due to different router manufactures. Please contact the manufacture of router if you have any problems with setting virtual server.
Education Sharing System User Manual SSH Settings Purpose: You can enable SSH feature, thus to effectively prevent information leakage during remote management. Go to Configuration > System Settings > Maintenance > Security Service via web browser. Check Enable SSH. Click Save to save the settings.
Education Sharing System User Manual Chapter 10 Alarm Settings Alarm Input Purpose: Set the handling action of the external sensor alarm. Go to Configuration > System Settings > Event Configuration > Alarm Input via web browser. Alarm Input Settings Interface Check Enable Alarm Input Handling.
Education Sharing System User Manual Enter Alarm Name. Configure arming schedule. Linking method is only available in the arming period. 1) Select a day in a week to configure arming schedule. 2) Set the arming schedule of the selected day. 3) Optionally, you can click to copy the schedule to other days.
Education Sharing System User Manual Alarm Output Settings Interface Select Alarm Output No. to configure in the dropdown list. Select the Delay duration. The device sends out alarm output signal for the set duration. Enter Alarm Name. Configure the arming time. The alarm output signal is only available in arming duration. 1) Select a day in a week to configure arming schedule.
Page 75
Education Sharing System User Manual Exception Select Exception Type. HDD Full: The HDD is full. HDD Error: Writing HDD error or unformatted HDD. Network Disconnected: Disconnected network cable. IP Address Conflicted: Duplicated IP address. Illegal Login: Incorrect user ID or password. ...
Education Sharing System User Manual Chapter 11 User Management Purpose: You can add, edit, and delete users. Go to Configuration > System Settings > User Management > User Management via web browser. User Management Add a User Click Add. Add User Enter user name and password.
Education Sharing System User Manual upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. Select Level as Operator or User.
Education Sharing System User Manual Delete a User Select a user account. Click Delete, and a message box will pop up. Click OK to delete the selected user account.
Education Sharing System User Manual Chapter 12 Maintenance Purpose: You can restart, restore default, repair database index, export/import configuration file, and upgrade device in Configuration > System Settings > Maintenance > Upgrade & Maintenance via web browser. Maintenance Reboot the Device Click Reboot to restart the device.
Education Sharing System User Manual Export/Import Configuration File Import configuration file. 1) Click Browse. 2) Select configuration file path. 3) Click Import to import the selected file. Export configuration file. 1) Click Export. 2) Select exporting path. 3) Click Save to save the configuration file. Import/Export IP Camera Configuration File Purpose: You can export the education sharing system’s IP camera adding configuration file to the computer.
Education Sharing System User Manual Chapter 13 Other Settings Sound Settings You can configure the sound volume in System Settings > Sound via local menu. For sound mix settings, refer to 5.2.7 Sound Mix Settings for details. Configure Sound Volume Video Settings Purpose: By configuring the video parameters you can define the parameters which affect the image quality,...
Education Sharing System User Manual Select Stream Type as Main Stream (Normal), Third Stream, Sub-Stream. Main stream is for recording and sub-stream is for network transmission. Configure the video parameters as your desire, including Resolution, Bitrate Type, Video Quality, Frame Rate, Max. Bitrate. The video encoding format and audio encoding format will be shown in Encoding Format and Audio Format.
Education Sharing System User Manual Menu Output Edit Menu Output, VGA Resolution, HDMI Resolution and HDMI/VGA Simultaneous Output. HDMI/VGA Simultaneous Output: It means that the screens connected by different interfaces (e.g. HDMI, VGA) share the same output source, so their images are the same, so do the mouse operation and menu content.
Education Sharing System User Manual Display Settings Select Channel No. Configure parameters as your desire. Optionally, you can overlay text on the selected channel. 1) Check the number of Text OverLay. 2) Enter text content. 3) You can drag the OSD on screen to move its position. 4) Set the Display Mode and OSD Size as your desire.
Education Sharing System User Manual Time Settings via Local Menu Select Time Zone. Select Time Sync Method. Manual Time Sync: Manually adjust the device time. NTP Time Sync: Automatically adjust the device time with the connected NTP server. Set the related parameters.
Education Sharing System User Manual Time Settings via Web Browser Select Time Zone. Select the clock synchronization mode as NTP or Manual Time Synchronization. NTP: Enter NTP server, port and interval time. Manual Time Sync: Set the time in Set Time. Or you can check Synchronize with computer time.
Education Sharing System User Manual during months when the weather is the warmest. We advance our clocks ahead a certain period (depends on the DST bias you set) at the beginning of DST, and move them back the same period when we return to standard time (ST). Go to Configuration >...
Page 88
Education Sharing System User Manual You can search and export logs as your desire.
Education Sharing System User Manual Chapter 14 Appendix SADP Software Introduction Description of SADP SADP (Search Active Devices Protocol) is a kind of user-friendly and installation-free online device search tool. It searches the active online devices within your subnet and displays the information of the devices.
Education Sharing System User Manual Device can be searched and displayed in the list in 15 seconds after it went online; it will be removed from the list in 45 seconds after it went offline. Search online devices manually You can also click to refresh the online device list manually.
Page 91
Education Sharing System User Manual Dual-stream is a technology used to record high resolution video locally while transmitting a lower resolution stream over the network. The two streams are generated by the DVR, with the main stream having a maximum resolution of 1080P and the sub-stream having a maximum resolution of CIF.
Education Sharing System User Manual centralized management and storage for IP cameras, IP Domes and other DVRs. Acronym for Phase Alternating Line. PAL is also another video standard used in broadcast televisions systems in large parts of the world. PAL signal contains 625 scan lines at 50Hz. Acronym for Pan, Tilt, Zoom.
Page 93
Education Sharing System User Manual UD22631B...