Use; The Control Panel - Westinghouse WDV656HQWA Manual

6 www.electrolux.com
3.

USE

3.1 The Control Panel

PROGRAM SELECTOR KNOB
1
Turn the Program Selector knob to
choose a drying program.
The table "Program Guide"
shown on page 7 will help
you in selecting the right program.
NOTES : The Program Selector knob
is not a timer. Once you select a
drying program, the Program Selector
knob will stay at that position for
the whole drying cycle.
START/PAUSE BUTTON
3
This button allows you to start or
pause the dryer to check the
contents or perhaps add more
clothes.
NOTES : The dryer will not start
unless the door is closed.
(If door is not closed you
will hear 6 beeps followed by
DRY LED blinking 4 times.)
If selector knob is turned while
dryer is running or paused
mid cycle 3 beeps is heard to
indicate operation is not allowed.
Cycle will not continue if selector
knob is not returned to original
selected program.
1
INDICATORS
2
STATES
Initial Power on.
• After appliance is powered on.
Allows user to select a drying
•
program
Machine Switched Off
Drying Phase
• Drying cycle starts.
• Buzzer will sound after main
drying and cooling phases
ends, at the start of
anticrease.
•
Anticrease in progress
Paused
• Drying cycle paused
• Cannot change drying program
End State
• Drying cycle and
Anticrease completed
Alarm/ Error
See description on page 10
•
ANTI CREASE CYCLE IN PROGRESS
The anti crease cycle is designed to help prevent creases
forming in the clothes after normal drying cycle has ended.
The anti crease progress indicator will start blinking during
the time anti crease phase is running. The drum will rotate
for 5 seconds every minute and will go for 1 hour
Anti crease phase cannot be disabled.
NOTE:
2
• Dry LED Off
• End LED blinks
Anti crease can be stopped at any time by
opening the door and removing the clothes.
3
STATUS INDICATOR
• Dry LED blinks
• End LED Off
• All LED Off
Drying & Cooling
• Dry LED On
• End LED Off
Anticrease
• Dry LED Off
• End LED blinks
• Dry LED blinks
End LED Off
• Dry LED Off
• End LED Off
• Dry LED blinks
• End LED blinks