Advertisement
Quick Links
SOLO
NBMU-0512
TOILET INSTALLATION INSTRUCTIONS
THANK YOU FOR CHOOSING NELLA™
Welcome to the Nella™ family. We are confident Nella's™ superior quality, design and aesthetic will enhance your bath-
room experience for many years to come. If you have any questions regarding your Nella products please contact your
local sales representative or visit our website www.nellabath.com for customer support and service information.
Thank you again,
NELLA™
PRIOR TO INSTALLATION
Prior to installation please be sure to review all installation instructions with a licensed or qualified plumbing technician
who is familiar with all local plumbing and building codes in your jurisdiction.
PRODUCT FEATURES AND DESCRIPTION
FEATURES
• Vitreous china
• Seamless one-piece design
• 2" fully glazed trapway
• 12" (305mm) rough-In
• Siphonic Jet
• Water Conscious
Single Flush
TM
• Low Flow 1.28 GPF / 4.8 L / HET
INCLUDED COMPONENTS
• Seat w/lid (soft-close)
• Tank cover
• Flush actuator
• Wax ring
• Floor installation kit
CODES AND STANDARDS
Meets or exceeds:
• ASME A112.19.2 /CSA B45.1
• ASME A112.19.14
IMPORTANT - PRIOR TO INSTALLATION
Before you begin please be sure to review the steps below to ensure preferred installation results.
1. Unpack your new NELLA™ product and confirm it is the correct model ordered and inspect the product for damage.
Please keep product in its original packaging until you are ready for installation.
2. Confirm that all walls are plumb and all mounting/installation surfaces are level.
3. Shut of existing water supply.
4. Confirm that your plumbing technician has the proper/recommended tools for proper installation.
USA / Canada:
www.nellabath.com
™
Advertisement
Related Manuals for nella SOLO NBMU-0512
Summary of Contents for nella SOLO NBMU-0512
- Page 1 Welcome to the Nella™ family. We are confident Nella’s™ superior quality, design and aesthetic will enhance your bath- room experience for many years to come. If you have any questions regarding your Nella products please contact your local sales representative or visit our website www.nellabath.com for customer support and service information.
-
Page 2: Rough-In Dimensions
™ SOLO NBMU-0512 TOILET INSTALLATION INSTRUCTIONS Tape Measure Pencil Ruler Square Level Pipe Wrench Channel Locks Scroll Saw Adjustable Wrench Pipe Clamp Pipe Cutter Hacksaw Plumber’s Putty or Putty Knife Caulking Drill Philips Flathead Screwdriver Screwdriver ROUGH-IN DIMENSIONS USA / Canada: www.nellabath.com... - Page 3 ™ SOLO NBMU-0512 CONCEALED MOUNT INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 3. Insert screw through the plastic mounting brackets and install securely to floor in proper location. 1. Remove existing toilet and prepare installa- tion surface. • Shut off toilet supply and flush tank completely. • Disconnect and remove supply line. • If replacing a toilet remove old toilet and existing wax ring. Cover/plug floor waste opening.
- Page 4 ™ SOLO NBMU-0512 CONCEALED MOUNT INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 6. Press toilet down firmly on wax ring and flange until toilet is securely seated on floor. Sealant Apply Silicone Sealant 7. Adjust the plastic mounting brackets so 9. Connect water supply. they align with the mounting hole location on • Connect the shut-off valve to the supply pipe.
- Page 5 ™ SOLO NBMU-0512 EXPOSED MOUNT INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 1. Remove existing toilet and prepare installa- 4. Position toilet squarely with wall and align tion surface. toilet with closet flange. Slowly lower toilet down onto closet flange • Shut off toilet supply and flush tank completely. making sure base mounting holes are aligned • Disconnect and remove supply line.
- Page 6 ™ SOLO NBMU-0512 EXPOSED MOUNT INSTALLATION INSTRUCTIONS 6. Apply a small bead of silicone sealant where toilet base meets finish floor. Wipe and clean any excess sealant immedi- ately. Sealant Apply Silicone Sealant 7. Connect water supply. • Connect the shut-off valve to the supply pipe. Gradually open the valve and check for leaks. • Flush several times to test for leaks and continue to do so periodically for the first few days of usage.
- Page 7 ™ SOLO NBMU-0512 CONCEALED MOUNT WITH SIDE ACCESS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 3. Install T-bolts in correct floor position and fasten closet flange. 1. Remove existing toilet and prepare installa- tion surface. Closet Flange T-Bolt • Shut off toilet supply and flush tank completely. • Disconnect and remove supply line. • If replacing a toilet remove old toilet and existing wax ring. Cover/plug floor waste opening.
- Page 8 ™ SOLO NBMU-0512 CONCEALED MOUNT WITH SIDE ACCESS INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 6. Place the bolt cap bases on the T-bolts and 8. Apply a small bead of silicone sealant proceed to secure the toilet into place by fas- where toilet base meets finish floor. tening the washers and nuts to the bolt caps Wipe and clean any excess sealant immedi- and T-bolts.
-
Page 9: Parts And Accessories
™ SOLO NBMU-0512 TOILET SEAT INSTALLATION INSTRUCTIONS PARTS AND ACCESSORIES PIN POSITION AND HINGE ADJUSTMENT COVER PLATE INTEGRATED ANCHOR ADJUSTMENT ANCHOR PLATE FIXING SCREW RUBBER WASHER • By rotating the anchor plate around the screw, maximum hinge adjustment is achievable. Please refer to the diagram above (Adjustment A). • Additional adjustment and fine-tuning of the pin position can accomplished by sliding the within the anchor plate (adjustment B). - Page 10 ™ SOLO NBMU-0512 TOILET SEAT INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Attaching the hinge anchor • Place integrated anchor into anchor holes provided on the toilet pan. • Place Anchor Plate over the integrated anchor and Insert screws. • Tighten the screw and fasten anchor plate to the integrated anchor.