LG RC8 U2 V W Series Owner's Manual page 27

Using Dryer Cycle
Remote Start
Use a smart phone to control your appliance
remotely. You can also monitor your cycle
operation so you know how much time is left in
the cycle.
To Use Remote Start:
1
Press the Power button.
2
Put the laundry in drum.
3
Press and hold the Buzzer button for 3
seconds to enable the Remote Start
function.
4
Start a cycle from the LG SmartThinQ
application on your smart phone.
NOTE
• Once the Remote Start mode is enabled, you
can start a cycle from the LG SmartThinQ
smartphone application. If the cycle is not
started, the machine will wait to start the cycle
until it is turned off remotely from the
application or the Remote Start mode is
disabled.
• If the door is open, Remote Start is disabled.
To Disable Remote Start:
When Remote Start is activated, press and hold
the Buzzer button for 3 seconds.
Download Cycle
Download new and special cycles that are not
included in the basic cycles on the appliance.
Appliances that have been successfully
registered can download a variety of specialty
cycles specific to the appliance.
Only one cycle can be stored on the appliance
at a time.
Once cycle download is completed in the
appliance, the product keeps the downloaded
cycle until a new cycle is downloaded.
Wireless LAN Module Specifications
Model LCW-004
Frequency
2412 to 2472 MHz
Range
IEEE 802.11b:17.82 dBm
Output
IEEE 802.11g:17.72 dBm
Power(Max)
IEEE 802.11n:16.61 dBm
Wireless function S/W version : V 1.0
For consideration of the user, this device should
be installed and operated with a minimum
distance of 20 cm between the device and the
body.
Standby power consumption
Network standby power
consumption
The period of time after
which the power management
function, or a similar
function, switches the
equipment automatically into
standby and/or off mode and/
or the condition providing
networked standby
EN
0.42 W
2.0 W
20 min.
27