Tidying Cables; Not Using The Desk-Type Stand - LG LS38 Series Owner's Manual

18
ASSEMBLING AND PREPARING
CAUTION
y Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
y If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
y Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
y Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer's
warranty.
NOTE
y Use the screws that are listed on the VESA
standard screw specifications.
y The wall mount kit includes an installation
manual and necessary parts.
y The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
y The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
y For more information, refer to the manual
supplied with the wall mount.

Tidying cables

1 Gather and bind the cables with the cable
management.
2 Fix the cable management firmly to the TV.
Cable Management
CAUTION
y Do not move the TV by holding the cable
management, as the cable management
may break, and injure and damage to the
TV may occur.
Not using the Desk-Type
Stand
y When installing the wall mounting bracket,
use the Protection cover. This will protect
the opening from accumulating dust and dirt.
Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
Protection cover