Page 1
For the first time, please download “P2PCamLive” app and install. Click Install, this app will be installed to your phone. [Connect to CA1522M] Users have 3 ways to connect to CA1522M, and then there are ways to connect P2PCamLive app and use. 1. Local Link...
Page 2
CA1522M. (The default SSID is “CA1522M-24”, default password is “12345678”.) As shown, users using Wi-Fi direct link CA1522M, and then there are 3 ways to connect P2PCamLive app. Search default SSID “CA1522M-24”, and the default password is “12345678”.
Page 3
Confirm the connection status, this status shows “Connected”. 2. Internet-WPS Link Users using the AP-Router connected by on CA1522M, and then using the phone Wi-Fi (or Internet) link to this AP-Router, so will be able to complete. As shown, users using the AP-Router connected by on CA1522M, and then there are 3 ways to connect P2PCamLive app.
Page 4
As shown, users pressed the WPS-button (over 2 seconds) to create a link with the AP-Router. After creating the link, you will see a link to the information on the AP-Router screen.
Page 5
As shown, you can use the phone Wi-Fi (or Internet) connected to the AP-Router, then connect CA1522M. 3. Internet -Ethernet Link Users using the AP-Router connected by Ethernet on CA1522M, and then using the phone Wi-Fi (or Internet) link to this AP-Router, so will be able to complete.
Page 6
CA1522M, and then there are 3 ways to connect P2PCamLive app. After creating the link, you will see a link to the information on the AP-Router screen. As shown, you can use the phone Wi-Fi (or Internet) connected to the AP-Router, then connect CA1522M.
Page 7
Open P2PCamLive app, then enter the main screen I. Key-in UID Please key-in a corresponding UID. (UID number is 20 yards)
Page 8
Please key-in password, then select OK. (The default password is “888888”) Congratulations, you have finished adding the camera, and then tap the screen to enter the camera.
Page 9
As shown, you can find out the video captured by the camera. II. QR Code Please scan the QR Code, and confirm whether an error.
Page 10
Please key-in password, then select OK. (The default password is “888888”) Congratulations, you have finished adding the camera, and then tap the screen to enter the camera.
Page 11
As shown, you can find out the video captured by the camera. III. LAN Search Select LAN Search. And confirm UID number is 20 yards, selected after confirmation.
Page 12
Please key-in password, then select OK. (The default password is “888888”) Congratulations, you have finished adding the camera, and then tap the screen to enter the camera.
Page 13
As shown, you can find out the video captured by the camera.
Page 14
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.