Miniso K616-833 Manual

Wireless keyboard and mouse set

K616-833 wireless keyboard and mouse set

manual

Features:

1. The keyboard and mouse share a USB receiver and both the keyboard and mouse have their

own receiver storage compartment to prevent loss

2. 2.4G connection, 10 meters stable transmission distance

3. The bottom bracket design of the keyboard can adjust the angle of the keyboard for easy use

4. Low power consumption, automatically enter power saving mode when not in use

5. Mute mouse buttons

mouse:

1. Size: 9.8cmx5.8cmx3.7cm

2. Color: pink

3. Connection: 2.4G

4. Number of keys: 3 keys

5. Working voltage: 1.5V

6. Working current: 25mA

7. Working temperature and humidity: -25～55℃/<85%RH

8. Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10

keyboard:

1. Size: 36.6cmx13.1cmx2.4cm

2. Color: pink

3. Connection: 2.4G

4. Number of keys: 100 keys

5. Working voltage: 1.5V

6. Working current: 20mA

7. Working temperature and humidity: -25～55℃/<85%RH

8. Support system: Windows 98/2000/ME/NT; Windows XP Windows VISTA /7/8/10

Open the battery cover at the bottom of the keyboard, take out the receiver, insert the receiver

into the USB port of the computer, put a AA battery (AA battery) into the battery slot, cover the

keyboard battery cover, and then open the battery cover of the mouse to put a battery Insert AA

batteries (AA batteries) into the battery slot and then cover the mouse battery cover to use.

1. Do not expose the battery to humidity and high temperature, and avoid contact with

conductive materials or liquids

2. Do not short circuit

3. Do not disassemble or attempt to repair this product by yourself.

Table of Contents

Do you have a question about the K616-833 and is the answer not in the manual?

Page 1 K616-833 wireless keyboard and mouse set manual Features: 1. The keyboard and mouse share a USB receiver and both the keyboard and mouse have their own receiver storage compartment to prevent loss 2. 2.4G connection, 10 meters stable transmission distance 3.
Page 2 4. If the product does not operate normally, please contact the after-sales department in time to obtain relevant services or maintenance storage method: Power off storage, do not expose to humidity, high temperature environment Receiver information: 1. Current: 20mA 2. USB interface: Compatible with USB 1.1/2.0/3.0 3.
Page 3 ISED This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.