Table of Contents
Advertisement
Auto Changeover operation
(Optional)
This mode changes the operation mode auto-
matically to maintain the set temperature
at ±2°C(4°F).
1
Press
to turn on the power.
ON
OFF
2
Press
repeatedly to select the auto
MODE
changeover operation.
-
is displayed on the display screen.
3
Press
or
to set the desired temper-
ature.
- The temperature range is 18°C(64°F) -
30°C(86°F).
4
Press
repeatedly to select the fan
FAN
SPEED
speed.
!
NOTE
This function may not be supported,
depending on the model.
°C/°F Conversion
ROOM
Press
(Plasma & Non plasma model)
TEMP
C/ F [5SEC]
or press
(Skin care model)
SAVING
C/ F [5SEC]
The unit converses from °C to °F
or from °Fto °C if pressed for 5 seconds.
ADVANCED FUNCTIONS
Energy saving cooling mode
This mode minimizes power consumption dur-
ing cooling and increases the set temperature
to the optimal level for a more comfortable en-
vironment.
The temperature automatically sets at
22°C(72°F) if ambient temperature is below
22°C(72°F).
The temperature maintains if ambient temper-
ature is above 22°C(72F).
1
Press
ON
to turn the power on.
OFF
2
Press
repeatedly to select the cooling
MODE
operation.
3
Press
.
E/SAVING
-
is displayed on the display screen.
!
NOTE
- This function may not be supported,
depending on the model.
- Possible to display di erent temperature
between remote controller and air condi-
tioner during operation.
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
1
Press
or
LIGHT
LIGHT
!
NOTE
This function may not be supported,
depending on the model.
17
Advertisement
Table of Contents
