Advertisement
•
Remove the retaining screws and lift off the appliance top cover.
•
Remove the screws and upper-hinge assembly then lift and remove the upper
door away from the middle hinge assembly. Now remove the hinge pin from
the upper hinge, turn the hinge over and refit the pin into the same hole.
•
Remove the screws and middle hinge assembly then lift the lower door away
from the lower hinge assembly.
•
Remove the screws, lower hinge and foot assembly. Now remove the hinge pin
from the lower hinge, turn the hinge over and refit the pin into the same hole.
•
Remove the left foot and refit on the right-hand side.
•
Now fit the lower hinge and foot assembly to the left-hand side. Tighten the
screws.
•
Place the lower door onto the lower hinge and then refit the middle hinge into
the pre-drilled holes on the left-hand side of the cabinet. Tighten the screws.
•
Now place the upper door onto the middle hinge and then refit the upper
hinge into the pre-drilled holes on the left-hand side of the cabinet. Tighten
the screws.
•
Ensure that both doors are correctly aligned and that they seal correctly. If the
doors require further alignment, slacken off the screws, re-align the doors then
tighten the screws.
•
Re-fit the appliance top cover.
11
Advertisement
