2.1.1. How to enable the AMD CrossFireX
TM
CrossFireX
If you are planning on using this graphics card as part of a CrossFireX system, the following is required:
- One or two CrossFire bridge interconnect cables
Step 1:
Install two CrossFireX graphics cards of the same chipset on a CrossFireX-supported motherboard and con-
nect the graphics cards via two CrossFire bridge interconnect cables (Figure 1). Then users can enable the
CrossFireX technology through the graphics card driver.
Two CrossFire bridge
interconnect cables.
Step 2:
If AMD CrossFireX is not enabled, access the AMD Catalyst Control Center (please refer to Page 14). From
the AMD Catalyst Control Center, enter the CrossFire menu and assure to select the Enable CrossFireX
check box (Figure 2).
TM
technology?
Figure 1
Figure 2
- 5 -
Two CrossFire graphics cards of the same type.
(Example: GV-RX195P256D-RH)
Hardware Installation
TM