Before First Use; Settings - AEG L8WBC61SCC User Manual

11. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.

12. SETTINGS

12.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the Skvrny/Předpírka and the
Odložený start buttons simultaneously
until the indicator
off on the display.
You can activate this option:
• After you touch the Start/Pauza
button: all the buttons and the
programme dial are deactivated
(except Zap./Vyp. button ).
• Before you touch the Start/Pauza
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
12.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
comes on/goes
3. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
4. Pour a small quantity of detergent
into the compartment marked by
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the programme is
completed, touch the Odložený start and
the Rychlý buttons simultaneously for
about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
12.3 Permanent Extra Rinse
With this option you can permanently
have one or two extra rinses when you
set a new programme.
• Simultaneously touch the Teplota
button and the Odstřeďování button
once to add one extra rinse.
appears on the display.
• Simultaneously touch the Teplota
button and the Odstřeďování button
twice to add two extra rinses.
appears on the display.
• Simultaneously touch the Teplota
button and the Odstřeďování button
three times to remove extra rinses.
The display only shows
ENGLISH 29
.
.