Getting To Know Your Appliance - Bosch KGF39PI30 Instructions For Use Manual

en
Electrical connection
The socket must be near the appliance
and also freely accessible following
installation of the appliance.
The appliance complies with the
protection class I. Connect the appliance
to 220–240 V/50 Hz alternating current
via a correctly installed socket with
protective conductor. The socket must
be fused with a 10 to 16 A fuse.
For appliances operated in non-
European countries, check whether the
stated voltage and current type match
the values of your mains supply match
the values of the mains supply. This
information can be found on the rating
plate. Fig. /
ã=
Warning
Never connect the appliance
to electronic energy saver plugs.
Our appliances can be used with mains
and sine-controlled inverters. Mains-
controlled inverters are used
for photovoltaic systems which
are connected directly to the national
grid. Sine-controlled inverters must be
used for isolated applications (e.g. on
ships or in mountain lodges) which are
not connected directly to the national
grid.
28
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. 1
* Not all models.
1-9 Controls
10 Light switch
11 Light (LED)
12 Shelf in the refrigerator
compartment
13 Air outlet opening
14 Egg rack
15 "Cool-fresh" container
16 Humidity filter
17 Humidity container
18 Frozen food container
19 Butter and cheese compartment
20 Shelf for tubes and small tins
21 Shelf for large bottles
22 Ice pack
23 Freezer calendar
A Refrigerator compartment
B Cool-fresh compartment
C Freezer compartment