Advertisement
CARE AND MAINTENANCE
CAUTION!
Cleaning the Air Filter
If dirt is allowed to collect in the air filter, the airflow will
be reduced, leading to reduced performance, and increased
operating noise. Be sure to clean the filters at the beginning
of the operating season, and about every two weeks during
periods of frequent operation.
Remove the Air Filter
Remove the Air Filter from the front panel assembly by lift
up the air filter's handle and pull out.
Cleaning
Use a vacuum cleaner to remove dust and dirt from the
air filter, or wash in a synthetic detergent. After washing,
dry in a shaded place, then reinstall.
Installing the Air Filter
Insert the filter to the panel, making sure the two upper tabs
and the lower tab are return properly to their holes in the
panel.
Inspections and Repairs
Depending on the conditions of use, the internal parts of an air conditioner will become dirty after about two or three
seasons of use, and performance may be affected. For this reason, regular professional maintenance is recommended.
Consult authorized service personnel.
Before cleaning the unit, be sure to stop the unit and disconnect the power supply.
1. Disconnect the power plug.
G A fan operates at high speed inside the unit, and personal injury could result.
Filter
2. Turn off the electrical breaker.
Cleaning the Indoor Unit
Clean the indoor unit by wiping with a cloth dipped in
cool or warm water, then wipe with another soft, clean,
dry cloth.
CAUTION!
Never use water that is hotter than 40°C. The body
may warp or change colour.
Do not use inflammable sprays such as lacquer or
hair spray near the air conditioner.
The unit can be damaged by gasoline, benzine, thinners,
insecticides and other chemical agents.
When Not Using the Unit for Extended
Periods (One Month or More)
Operate the unit on fan mode for about one-half day on a
day with clear weather, to assure that the internal parts
are dry.
CAUTION!
When not using the unit for extended periods, discon-
nect the power plug for safety.
G When a plug is left connected, dust may collect on
the blades, leading to smoke and fire hazard.
Check the Power Cord
Check the power cord occasionally to confirm that it is
not damaged by cuts or abrasions. If you discover damage
to the cord, consult authorized service personnel.
More than 40 °C
En-11
Advertisement
