Do you have a question about the HK48BSA-L-2 and is the answer not in the manual?
Questions and answers
Gary Oliver Lancaster
February 6, 2025
Our company will be fabricating a stainless steel coutertop and the architect has designed for your Kegco HK48SA-L-2 to fit underneath. How does the stainless steel Draft Tower fit for the buil in application. I assume a specific cutout and the tower bolted to our countertop. Job name is Glenstone Museum in Potomac, MD
Thank you
1 comments:
Mr. Anderson
February 10, 2025
The Kegco HK48BSA-L-2 stainless steel draft tower is designed for both built-in and freestanding use, making it suitable for various installations. The draft tower is a 3" diameter dual faucet polished stainless steel tower, which is mounted using a gasket and four screws. Additionally, the included 12" x 7" stainless steel drip tray has a cut-out specifically designed to wrap around the 3" wide draft beer column, ensuring a secure and precise fit in a built-in setup. However, specific cutout dimensions for built-in installation are not provided in the context.
Page 1
INSTRUCTION MANUAL HK-48ADA BUILT-IN REFRIGERATOR BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Kegco has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice KEGCO 8520 Miralani Dr., San Diego, CA 92126 www.kegco.com...
Diagram and Description 1. LED Light 5. Digital Control Panel 2. Shelves (3) 6. Door 3. Bottom Grill 7. Temperature Probe 4. Adjustable Legs www.kegco.com 1-888-980-4810...
6 (Cr6), which is known to the state of California to cause cancer, birth defects, and other reproductive harm. For more information go to: www.P65Warnings.ca.gov. Failure to heed these safety warnings may result in extensive product damage, serious personal injury, or death. www.kegco.com 1-888-980-4810...
Position items so that air can circulate freely around them Do not leave door open for longer than required Make sure items do not touch the back of the storage compartment Do not set the thermostat to exceedingly cold temperatures www.kegco.com 1-888-980-4810...
Please be aware that the desired temperatures may fluctuate depending on the ambient temperature and the orientation of the items inside. Your Kegco refrigerator includes an operating panel on the front of the unit. The operating panel includes several features to operate and control the temperature of the refrigerator, including:...
Check for spills and for food or drink that is out of date or incorrectly packaged Outer surface of appliance is wet Condensation has formed and can be wiped dry External surface is warm Compressor is working to transfer heat from inside the cabinet www.kegco.com 1-888-980-4810...
32-1/2" H x 23-5/8" W x 23-5/8" D (without Handle) Cubic Footage 4.87 Cubic Feet Weight 112.45 lbs. (empty) Voltage / Frequency 110v / 60 Hz Running Amps 1.3 A Wattage 110W Refrigerant R600a Operating Temperature 32°F - 50°F Maximum Ambient Temperature 100°F www.kegco.com 1-888-980-4810...
WHAT IS COVERED LIMITED ONE-YEAR WARRANTY: For one year from the date of purchase by the original owner, Kegco will, at its option, repair or replace any part of the unit, which proves to be defective in material or workmanship under normal use. During this period Kegco will provide all parts and labor necessary to correct such defects free of charge, so long as the unit has been installed and operated in accordance with the written instructions in this manual.
Need help?
Do you have a question about the HK48BSA-L-2 and is the answer not in the manual?
Questions and answers
Our company will be fabricating a stainless steel coutertop and the architect has designed for your Kegco HK48SA-L-2 to fit underneath. How does the stainless steel Draft Tower fit for the buil in application. I assume a specific cutout and the tower bolted to our countertop. Job name is Glenstone Museum in Potomac, MD Thank you
The Kegco HK48BSA-L-2 stainless steel draft tower is designed for both built-in and freestanding use, making it suitable for various installations. The draft tower is a 3" diameter dual faucet polished stainless steel tower, which is mounted using a gasket and four screws. Additionally, the included 12" x 7" stainless steel drip tray has a cut-out specifically designed to wrap around the 3" wide draft beer column, ensuring a secure and precise fit in a built-in setup. However, specific cutout dimensions for built-in installation are not provided in the context.
This answer is automatically generated