Advertisement
Quick Links
Instruction Sheet
DECORA PANELS
®
Pre-Configured Decora Panels
®
Model # T1P
Model # LT2P
Model # LT2-T1P
THANK YOU
®
Thank you for purchasing a Pre-Configured Decora
Panel. Please read these instructions thoroughly
before installing this product.
PRODUCT FEATURES
- Pre-configured for simplified installation
- Daisy-chained to use only one 12V DC Input / Feed Through
- Available with Light Modules, a Temperature Module or a combination of
both
I-00201
Rev B
Advertisement
Summary of Contents for Middle Atlantic Products DECORA T1P
- Page 1 Instruction Sheet DECORA PANELS ® Pre-Configured Decora Panels ® Model # T1P Model # LT2P Model # LT2-T1P THANK YOU ® Thank you for purchasing a Pre-Configured Decora Panel. Please read these instructions thoroughly before installing this product. PRODUCT FEATURES - Pre-configured for simplified installation - Daisy-chained to use only one 12V DC Input / Feed Through - Available with Light Modules, a Temperature Module or a combination of...
- Page 2 OPERATION TEMPERATURE DISPLAY Alarm Set Point Button - The factory preset overtemp alarm point is 95ºF (35ºC). The adjustment range is from 90º to 115ºF (32º to 46ºC). - To view the alarm set point, press and release once. - To change the factory preset alarm set point, repeatedly press the Alarm Set Point Button until the desired temperature is displayed.
- Page 3 INSTALLATION 1) Using the provided Tie Saddle, mount the Temperature Probe at the highest available location in the enclosure. 2) Plug in the Power Supply. MODEL # T1P LT2P / LT2-T1P 1) Using the provided Tie Saddle, mount the Temperature Probe at the highest available location in the enclosure.
- Page 4 Voice 613-836-2501 - Fax 613-836-2690 / middleatlantic.ca - customerservicecanada@middleatlantic.ca Factory Distribution USA: NJ - CA - IL Canada: ON - BC At Middle Atlantic Products we are always listening. Your comments are welcome. Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company. Page 4...