Table of Contents
Advertisement
Set ID
For Set ID number, see "Real data mapping (Hexadecimal → Decimal)".
1
Press SETTINGS to access the main menus.
2
Press the Navigation buttons to scroll to OPTION 1 and press OK.
3
Press the Navigation buttons to scroll to Set ID and press OK.
4
Scroll left or right to select a set ID number and select Close. The
adjustment range is 1-99.
5
When you are finished, press EXIT.
Communication Parameters
•
Baud rate : 9600 bps (UART)
•
Data length : 8 bits
•
Parity : None
•
Stop bit : 1 bit
•
Communication code : ASCII code
•
Use a crossed (reverse) cable.
EXTERNAL CONTROL DEVICE SETUP
109
Advertisement
Table of Contents
