REMOTE CONTROL OPERATING METHOD
Throttle Joystick
Direction Joystick
FLIGHT
F/2.15 100° FOV
FUII HD Wi-Fi Cam
Remark: The compass will be calibrated automatically when the magnetic
interference occur, it is not necessory to calibrate the compass by manually.
UP
DOWN
Ensure the remote control antennas opened correctly
before operation. It takes about 40 seconds for the
aircraft to connect to the remote control.
Step 1: Power on the remote control
(Paring takes 40 seconds if the system started)
Step 2: Turn on the aircraft and set down on a
level surface
— The aircraft will auto-trim to this level surface.
— Four aircraft arms -- Blinking Red.
— Power on the remote control and link the aircraft
automatically.
— Lights flashing blue (back) and white (front).
— NOTE: You connect to the WIFI at this time to
view the current drone on the SJ F PRO App, or
wait until after GPS is calibrated.
Step 3: Connect APP
— Connect your smart phone to the WIFI of aircraft and check
the aircraft's status on the "SJ-F-PRO *** -BRG" APP.
Step 4: Compass Calibration
1. Compass Calibration Part 1
— Push the joysticks into the 1 & 11 o'clock position.
— Lights rapid-blinking Blue/red (back) and White/
red (front).
— App aircraft status: "Compass calibration".
9