Basic Operation; Quick Start Guide; Turning On And Off The Tv - Changhong Electric LED40D2200H Operation Manual

Basic Operation

QUICK START GUIDE

• Connection
1. Connecting the mains and antenna.
2. If TV has a power switch, turn it on firstly. Then press
remote to turn on the TV.
• First Time Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
OSD Language
Press the◄/►button to select the desired OSD (On Screen Display) language.
Mode Setting
Press the◄/►button to select Home Mode or Store Mode.
Country
Press the◄/►button to select the country you want to.
Tuner Type
Press the◄/►button to select Antenna or Cable.
Auto Scan
Press the◄/►button to select mode: DTV+ATV, DTV, ATV.
LCN
Press the◄/►button to select On or Off.
Auto Channel Update
Press the◄/►button to select On or Off.
When selecting Cable: A step appears allowing you to set parameters to the channels.
For more information, refer to Channel (Auto Scan).

Turning on and off the TV

• Turn on the TV
Connect the AC input cable.
button on remote control can turn on TV from standby mode.
• Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug the
set from the mains and aerial.
• No signal
There is No Signal menu on screen when there is no input signal. In ATV/DTV mode,
if there is no signal in 15 minutes, the TV will turn off automatically. In PC mode, the TV
set will automatically turn off in 1 minute if no input signal. When VGA cable is
connected, the TV turns on automatically.
If TV has a power switch, turn it on firstly.
9
Power button on the
Press the