How To Use; 7 Control Panel Features - LG WD100C Series Owner's Manual

HOW TO USE

CONTROL PANEL FEATURES
A
A
POWER (ON/OFF) BUTTON
Press to turn the washer ON. Press again to
turn the washer OFF. Pressing the POWER
button during a cycle will cancel that cycle
and any load settings will be lost. The drawer
will unlock after a brief pause.
NOTE:
• When the Power button is pressed, the
Normal cycle is selected by default. To
modify the default options or choose
another cycle, press the cycle selector (v)
button to illuminate the display.
B
CYCLE SELECTOR BUTTON
Press this button to select the desired cycle.
Once the desired cycle has been selected,
the standard presets will appear in the
display. These settings can be
using the cycle setting buttons any time
before starting the cycle.
NOTE: To protect your clothing, not all
settings are available on all cycle selections.
B C
E
C
START/PAUSE BUTTON
Starts or pauses the washing machine
cycle. Hold a second to start. If the washer
is running, use this button to pause the cycle
without losing the current settings.
NOTE: If the START/PAUSE button is not
pressed within a certain time, the appliance
will shut off and all settings will be lost.
D
OPTION BUTTONS
Use these buttons to adjust the settings for
the selected cycle. The setting lights above
the buttons illuminate to show the current
selection.
E
adjusted
TIME AND STATUS DISPLAY
The display shows the cycle status and
estimated time remaining.
F
REMOTE CONTROL SENSOR
Use the remote to set the controls without
bending down to reach the control panel.
HOW TO USE
D F
17