Battery Charging Tips And Precautions - Samsung SM-R890 User Manual

Getting Started

Battery charging tips and precautions

• If there are obstructions between the Watch and the wireless charger, it may not charge
properly. Check if there is any sweat, liquid, or dust on them before charging.
• If the battery is completely discharged, the Watch cannot be turned on immediately
when the wireless charger is connected. Allow a depleted battery to charge for a few
minutes before turning it on.
• If you use multiple apps at once, network apps, or apps that need a connection to
another device, the battery will drain quickly. To avoid losing power during a data
transfer, always use these apps after fully charging the battery.
• When connecting the wireless charger to another power source, such as a computer or
multi-charging hub, the Watch may not charge properly or it may charge more slowly
due to a lower electric current.
• The Watch can be used while it is charging, but it may take longer to fully charge the
battery.
• If the watch's power supply is unstable while being used and charged at the same time,
the touchscreen may not function. If this happens, disconnect the Watch from the
wireless charger.
• While charging, the Watch may heat up. This is normal and should not affect the Watch's
lifespan or performance. Before wearing the Watch, allow it to cool down for a while
before using it. If the battery gets hotter than usual, the charger may stop charging.
• If you charge the Watch while the wireless charger is wet, the Watch may be damaged.
Thoroughly dry the wireless charger before charging the Watch.
• If the Watch is not charging properly, visit a Samsung Service Centre.
• Avoid using a bent or damaged wireless charger cable. If the wireless charger cable is
damaged, stop using it.
19