Fault
The appliance is not work-
ing.
The programme does not
start.
The door cannot be opened. – –– is activated.
The water is not draining.
Cause
There has been a power cut.
You have not pressed
Door is not closed.
Childproof lock is activated.
is activated.
Laundry is caught in the
door.
The temperature is too high.
Water level is too high.
Power failure.
Drain pipe or water outlet
hose is blocked.
Drain pipe or water drain
hose is caught or jammed.
Drain pump is blocked.
– –– is activated.
Troubleshooting
Check whether the lighting in your
▶
kitchen or other appliances are
working.
.
Press
.
▶
Close the door.
1.
Press
to start the programme.
2.
→ "Deactivating the childproof
▶
lock", Page 36
Check whether
▶
→ "Buttons", Page 24
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press
to start the programme.
4.
Continue the programme by select-
▶
ing Centrifugering or Udpumpn-
ing and pressing
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 35
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 35
Start the Udpumpning pro-
▶
gramme.
Open the door using the emergency
▶
release.
→ "Emergency release", Page 53
Clean the drain pipe and the water
▶
outlet hose.
Ensure that the drain pipe and wa-
▶
ter drain hose are not kinked or
trapped.
→ "Cleaning the drain pump",
▶
Page 40
Continue the programme by select-
▶
ing Centrifugering or Udpumpn-
ing and pressing
Troubleshooting en
is activated.
.
.
47