Subscribe to Our Youtube Channel
Related Manuals for Relax The Back ZERO GRAVITY PR128 Series
Summary of Contents for Relax The Back ZERO GRAVITY PR128 Series
- Page 1 The Zero Gravity Lift Chair Relax The Back OWNER’S MANUAL Model PR128 PR128 MSWARB-RTB-2 PR128 06/18...
-
Page 2: Safety Guidelines
Safety Guidelines The symbols below are used in the owner’s manual and/or on the product to identify warnings and notify you of important safety information. Make sure you read and understand them completely. WARNING! Indicate(s) a hazardous situation which, if not avoided, could result in death or serious injury. - Page 3 Safety Guidelines Class II Device! Indoor use only! Do Not Smoke! Electrical hazard! Do not dispose in trash! Batteries required!
- Page 4 MANDATORY READ THIS MANUAL FIRST BEFORE INSTALLING OR OPERATING YOUR POWER LIFT AND RECLINE CHAIR. Your power lift and recline chair has been engineered from the leg levelers up to provide the ultimate in strength and reliability. Great care has been taken to provide you with total comfort and safety. Each unit is thoroughly inspected and tested prior to shipment.
- Page 5 Do not retrieve fallen objects from inside or under the chair while the chair is plugged into a power source. Do not operate the chair if there are any persons, pets or other obstructions under or in front of the footrest, under the chair or behind the chair.
- Page 6 INSTALLATION MAXICOMFORT WITH TWILIGHT POSITIONSING 1. Remove the transformer from the transformer box (located behind the lower outside back). Place transformer on floor behind chair. 2. Plug the transformer into a 115-120V 60Hz A.C. outlet and connect the power cable from the chair into the transformer as shown. Power cable is located under the chair attached to the motor with white zip tie.
- Page 7 MAXICOMFORT™ WITH TWILIGHT POSITIONING Patent Pending 3-Motor Seating Technology TV Watching TV Watching in Twilight Lounge in Twilight Lounge Reclined in Twilight Zero Gravity in Twilight Zero Gravity Chair arm removed for demonstration purposes.
- Page 8 rive with wilight ontrol perAtion 1. Getting into your lift chair. While standing next to your chair, press button (S7) and raise the chair to a height you can sit against. This height will vary from person to person depending on the individual’s needs. Raise the chair high enough so you do not have to flop down into the chair.
-
Page 9: Factory Reset
Programming the Memory Buttons S6 and S8 Press one of the preprogrammed buttons (S6, S8) and hold until the chair stops. Press buttons (S1 thru S4) to micro adjust those positions to suit your needs. Use the following procedure to reprogram (S6, S8) buttons after you have the chair in your desired position. - Page 10 LUMBAR SUPPORT SYSTEM OPERATION Your model PR128-MED and PR128-LAR are equipped with an inflatable bladder so you can adjust the firmness of the lumbar area on you lift chair. To inflate the bladder, place the black bulb in your hand and pump it until the lumbar area of your chair reaches the desired firmness, as shown.
-
Page 11: Battery Back Up System
Battery Back Up System Your power lift chair comes with a battery back up system so the chair can return to the seated position in the event of a household power failure. The batteries have enough energy to bring the chair to a seated position from the recline position. - Page 12 CONSUMER LIMITED LIFETIME AND SEVEN YEAR WARRANTY THE ZERO GRAVITY LIFT CHAIR by RELAX THE BACK GOLDEN, through its authorized distributor/service organization, warrants this chair to original consumer only, against defects in material or workmanship as follows: LIFETIME WARRANTY GOLDEN, warrants for the lifetime of the chair by the original consumer to repair or replace at their option the Lift Mechanism, Chair Frame and Recline Mechanism.
- Page 13 Limited Warranty Protection Plan ONE-YEAR TERM 1. This Protection Plan is an agreement between Relax The Back (RTB) and Golden Technologies whereby GOLDEN TECHNOLOGIES (GT) will furnish to the first retail purchaser of the RTB Zero Gravity Lift Chair, should it prove defective by reason of improper workmanship and components excluding fabric.
-
Page 14: Care And Maintenance
CARE AND MAINTENANCE our lift chair will require routine maintenance checks. You can perform some of these checks, while others may require assistance from a provider. By following these maintenance checks, you can make sure your lift chair gives you years of trouble-free operation. If you have any questions or concerns regarding your lift chair’s care and maintenance, contact your provider.
Need help?
Do you have a question about the ZERO GRAVITY PR128 Series and is the answer not in the manual?
Questions and answers