Connecting The Cable To The Indoor Unit - LG LPUC306KA0 Installation Manual

Connecting the Cable to Indoor Unit
• In order to protect cable, it should be inserted "Bushing Rubber".
• The inside and outside connecting cable can be connected after opening the inlet grille.
1. Open the inlet grille manually. (Fig 1)
2. Open the control cover with Driver( ).
3. Connect the cables (LG does not supply) to the terminal block in the control box.
4. Secure the control cover to the original position with the screw.
5. Close the inlet grille. (Fig 3)
Fig 1
Detail of Fig 2
• Cooling Model
1 2 3 4
To outdoor unit
• Heat Pump Model
1 2 3 4
To outdoor unit
• Heat Pump + Heater Model
1 2 3
To outdoor unit
To the main
terminal block
❈ To the main terminal block "1(L), 2(N)" of outdoor unit.
5 6
5 6
4 5 6
Fig 2
Installation of Unit
Fig 3
Knock-out holes
Installation Manual 13