Table of Contents
Advertisement
Quick Links
INSTALLATION, USE AND CARE MANUAL
FOR PROFESSIONAL VENTILLATION FOR
1. THIS APPLIANCE WAS DESIGNED FOR EASE OF INSTALLATION AND OPERATION. HOWEVER, WE
RECOMMEND THAT YOU READ ALL SECTIONS OF THIS MANUAL BEFORE YOU BEGIN INSTALLA-
TION.
2. DO NOT REMOVE PERMANANTLY AFFIXED LABELS, WARNINGS OR DATA PLATES FROM YOUR
APPLIANCE. THIS MAY VOID THE MANUFACTURER'S WARRANTY AND/OR HINDER EFFECTIVE
SERVICING AND MAINTENANCE.
3. THESE INSTRUCTIONS ARE TO REMAIN WITH THE APPLIANCE AND THE CONSUMER IS TO RE-
TAIN THEM FOR FUTURE REFERENCE.
4. PLEASE OBSERVE ALL LOCAL AND NATIONAL BUILDING CODES AND ORDINANCES. IF NO LO-
CAL CODES ARE APPLICABLE, PLEASE FOLLOW ALL WIRING REQUIREMENTS IN ACCORDANCE
WITH THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 EDITION.
5. PLEASE CHECK WITH A QUALIFIED AND TRAINED INSTALLER OR YOUR LOCAL CODES FOR ANY
MAKE UP AIR REQUIREMENTS.
6. THIS HOOD IS FOR RESIDENTIAL USE ONLY AND IS NOT DESIGNED FOR INSTALLATION OVER A
COMMERCIAL PRODUCT.
7. MAKE SURE ALL POWER IS TURNED OFF AT THE MAIN BREAKER OR FUSE BOX BEFORE MAKING
ANY CONNECTIONS.
8. TO AVOID RISK OF FIRE , ELECTRIC SHOCK, OR INJURY TO PERSONS, TURN OFF THE ELECTRIC-
ITY TO THE HOOD FROM THE POWER SUPPLY BEFORE CLEANING OR SERVICING.
This product is intended for domestic use only!
© Copyright 2007 Prizer –Painter Stoves Works
THE HOME
IMPORTANT!—PLEASE READ AND FOLLOW
P/N 750306Page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Blue Star BS-PL3024
Summary of Contents for Blue Star BS-PL3024
- Page 1 INSTALLATION, USE AND CARE MANUAL FOR PROFESSIONAL VENTILLATION FOR THE HOME IMPORTANT!—PLEASE READ AND FOLLOW 1. THIS APPLIANCE WAS DESIGNED FOR EASE OF INSTALLATION AND OPERATION. HOWEVER, WE RECOMMEND THAT YOU READ ALL SECTIONS OF THIS MANUAL BEFORE YOU BEGIN INSTALLA- TION.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Table of Contents ........................... 2 Safety Instructions ..........................3-4 Introduction ............................5 Welcome ..............................6 Handling & Unpacking .......................... 7 Packing list for your Vent Hood ....................... 8-9 Pro Line Hoods ......................... 8 Pyramid Style Hoods ....................... 9 Installation of Pro Line Series Dimensions…………. -
Page 3: Safety Instructions
IMPORTANT!—PLEASE READ AND FOLLOW 1. THIS APPLIANCE WAS DESIGNED FOR EASE OF INSTALLATION AND OPERATION. HOWEVER, WE RECOMMEND THAT YOU READ ALL SECTIONS OF THIS MANUAL BEFORE YOU BEGIN INSTALLA- TION. 2. DO NOT REMOVE PERMANANTLY AFFIXED LABELS, WARNINGS OR DATA PLATES FROM YOUR APPLIANCE. - Page 4 WARNING! TO REDUCE THE RISK OF A RANGETOP GREASE FIRE (CONTINUED): IF YOU ARE FLAMING LIQUOR OR OTHER SPIRITS, AND YOUR APPLIANCE IS INSTALLED UNDER A VENT HOOD, TURN THE FAN OFF. THE DRAFT CREATED COULD CAUSE THE FLAMES TO SPREAD OUT OF CONTROL.
-
Page 5: Introduction
Since 1880, we have been dedicated to quality! We believe that our success can only be measured by the continuing success of our customers. We achieve customer satisfaction by ensuring that each of our employees understands, meets and exceeds customer expectations. We establish and maintain an environment that encourages all employees to pursue continuous improvement in qual- ity and productivity. -
Page 6: Welcome
WELCOME! ™ ...to the exciting world of BlueStar cooking! You have purchased one of the finest appliances available for home use, which shows that you take cooking seriously. As the owner of a new BlueStar appliance you can look forward to years of cooking enjoyment. You will prepare meals with the speed and accuracy of a professional chef right in your own kitchen! All equipment is designed and manufactured to the highest quality standards in the in- dustry specifically to meet the needs of the world’s most demanding chefs: you. -
Page 7: Handling & Unpacking
HANDLING REMOVE ALL WATCHES, BELT BUCKLES, JEWELRY, RINGS AND ANY CLOTHING WITH METAL BUTTONS OR SNAPS TO PREVENT DAMAGE TO THE HOOD. WHEN YOU BEGIN THE INSTALLATION PROCESS REMOVE THE HOOD FROM IT’S ORIGI- NAL CARTON AND PLACE THE HOOD ON A CLEAN, NON-ABRASIVE BLANKET. ... -
Page 8: Packing List For Your Vent Hood
PACKING LIST FOR PRO LINE HOOD SERIES PL30240——24” depth No blower (Sold and Packaged Separately) Two (2) Stainless Steel Baffle Filters Two (2) Pre-Installed Lights Lid for Electrical Box Use and Care Manual with Wiring Diagram PL36240, PL42240—24”... -
Page 9: Pyramid Style Hoods
PACKING LIST FOR PYRAMID STYLE HOOD SERIES PC30240—24” depth No blower (Sold and Packaged Separately) Two (2) Stainless Steel Baffle Filters Two (2) Pre-Installed Lights Lid for Electrical Box Use and Care Manual with Wiring Diagram ... -
Page 10: Dimensions
DIMENSIONS OF THE PRO LINE SERIES HOOD INLET LOCATION FOR THE ELECTRICAL CONNECTION IS LOCATED NEAR THE REAR CENTER OF HOOD 2.5” FROM HOOD BOTTOM. ELECTRICAL REQUIREMENTS: 15 AMPS AT 120 VOLTS LIGHT BULBS ARE PAR 16 - 60 WATT HALOGEN ... -
Page 11: Site Preparation
SITE PREPARATION FOR PRO LINE SERIES IN SELECTING THE PROPER HEIGHT TO MOUNT THE HOOD, TAKE INTO CONSIDERATION THE STATURE OF THE PERSON OR PERSONS WHO WILL BE COOKING. A HEIGHT OF 30", MINIMUM HEIGHT OFF OF COOKING SURFACE, TO 36" MAXIMUM HEIGHT OFF OF THE COOKING SURFACE, WILL SUIT MOST USERS. -
Page 12: The Correct Height
THE CORRECT HEIGHT OF YOUR PRO LINE SERIES HOOD THE BOTTOM OF THE HOOD SHOULD BE 30" MINIMUM TO 36" MAXIMUM ABOVE THE COUNTERTOP. THIS WOULD TYPICALLY RESULT IN THE BOTTOM OF THE HOOD BEING 66" TO 72" ABOVE THE FLOOR. THE BOTTOM OF THE HOOD SHOULD NEVER BE MORE THAN 72"... -
Page 13: Duct Information
PRO LINE DUCT INFORMATION MODEL BLOWER (cfm) DUCT SIZE TRANSITION BS-IBPL600 6” BS-PL3024 BS-IBPL1200 10” TR6X15/10 BS-PL3024 BS-PL3624 BS-IBPL600 6” BS-IBPL1200 10” TR6X15/10 BS-PL3624 BS-PL4224 BS-IBPL600 6” BS-PL4224 BS-IBPL1200 10” TR6X15/10 BS-PL4824 BS-IBPL1200 10” TR6X15/10 BS-PL5424 BS-IBPL1200 10” TR6X15/10 BS-IBPL1200 10”... -
Page 14: Blower Installation
INSTALLATION OF YOUR PRO LINE SERIES HOOD BLOWER INSTALLATION OF BS-IBPL600 INTERNAL BLOWER KIT REFER TO WIRING DIAGRAM 1. REMOVE SHIPPING BRACKET (SEE ITEM 1)FROM HOOD. DO NOT DISCARD SCREWS! 2. INSTALL BLOWER BRACKET WITH THE SCREWS REMOVED FROM THE SHIPPING BRACKET. -
Page 15: Custom Duct Installation
INSTALLATION GUIDE FOR PRO LINE DUCT COVER REMOVE POP RIVETS FROM PRO HOOD THAT CORRESPOND WITH THE SMALL HOLES ON THE DUCT COVER. INSTALL HOOD TO CORRECT HEIGHT (BE CAREFUL TO LEAVE 12” FOR DUCT COVER) SLIDE DUCT COVER OVER TOP OF HOOD ... -
Page 16: Dimensions
DIMENSIONS OF THE PYRAMID STYLE SERIES HOOD P/N 750306 Page 16... -
Page 17: Site Preparation
SITE PREPARATION FOR PYRAMID STYLE SERIES IN SELECTING THE PROPER HEIGHT TO MOUNT THE HOOD, TAKE INTO CONSIDERATION THE STATURE OF THE PERSON OR PERSONS WHO WILL BE COOKING. A HEIGHT OF 30", MINIMUM HEIGHT OFF OF COOKING SURFACE, TO 36" MAXIMUM HEIGHT OFF OF THE COOKING SURFACE, WILL SUIT MOST USERS. -
Page 18: The Correct Height
THE CORRECT HEIGHT OF YOUR PYRAMID STYLE HOOD THE BOTTOM OF THE HOOD SHOULD BE 30" MINIMUM TO 36" MAXIMUM ABOVE THE COUNTERTOP. THIS WOULD TYPICALLY RESULT IN THE BOTTOM OF THE HOOD BEING 66" TO 72" ABOVE THE FLOOR. THE BOTTOM OF THE HOOD SHOULD NEVER BE MORE THAN 72"... -
Page 19: Duct Information
PYRAMID STYLE DUCT INFORMATION MODEL BLOWER (cfm) DUCT SIZE TRANSITION BS-PC3024 BS-IBPC600 6” BS-PC3624 BS-IBPC600 6” BS-PC3624 BS-IBPC1200 10” TR6X15/10 BS-PC4224 BS-IBPC600 6” BS-PC4224 BS-IBPC1200 10” TR6X15/10 BS-PC4824 BS-IBPC1200 10” TR6X15/10 BS-IBPC1200 10” TR6X15/10 BS-PC5424 BS-PC6024 BS-IBPC1200 10” TR6X15/10 BS-PC6624 BS-IBPC1200 10”... -
Page 20: Blower Installation
INSTALLATION OF YOUR PYRAMID STYLE HOOD BLOWER INSTALLATION OF BS-IBPC600 INTERNAL BLOWER KIT REFER TO WIRING DIAGRAM 1. REMOVE SHIPPING BRACKET(SEE ITEM 1) FROM HOOD. DO NOT DISCARD SCREWS! 2. INSTALL BLOWER BRACKET WITH THE SCREWS REMOVED FROM THE SHIPPING BRACKET. -
Page 21: Flue Installation
INSTALLATION GUIDE FOR FLUE (PYRAMID STYLE HOOD) 1. MEASURE FROM TOP OF THE CANOPY TO CEILING AND SUBTRACT 1/8" FOR CLEAR- ANCE. 2. PLACE THE DUCT COVER TOP INSIDE THE DUCT COVER BASE AND LOWER UNTIL DE- SIRED HEIGHT IS FOUND. (TO ELIMINATE SCRATCHES, MAKE A MARK ON THE DUCT COVER TOP FOR THE DESIRED LOWERING POINT BY SUBTRACTING 15"... -
Page 22: Wire Diagram
WIRE DIAGRAM FOR BLUESTAR PL AND PC HOODS P/N 750306 Page 22... -
Page 23: Cleaning And Maintenance
CLEANING AND MAINTENANCE YOUR HOOD MUST BE KEPT CLEAN AND MAINTAINED PROPERLY!! BAFFLE FILTERS BAFFLE FILTERS SHOULD BE EXAMINED PERIODICALLY TO ASSURE THAT ALL SUR- FACES AND PARTS ARE CLEAN THE FILTERS ARE DISHWASHER SAFE OR IN A SINK WITH HOT, SOAPY WATER ... -
Page 24: Warranty
WARRANTY WHAT IS COVERED? Prizer-Painter provides the following limited warranties to the original retail purchasers of Products sold and installed in the continental United States and Canada on or after February 22, 2002: Initial Seven (7) Day Limited Warranty. Prizer-Painter warrants that all cosmetic components of its products will, under normal use and service, be free from defects in materials and workmanship for a pe- riod of seven (7) calendar days from the date of delivery (the "Warranty Period") to the original retail pur- chaser. - Page 25 WARRANTY WHAT IS NOT COVERED? This Limited Warranty is the sole and exclusive warranty provided for the Product and extends only to original retail purchasers in the continental United States and Canada. This Limited Warranty is not trans- ferable to any subsequent purchasers or users. If any implied warranties arise under any applicable law (including, but not limited to, implied warranties of merchantability and fitness for particular purpose), then the duration of those implied warranties will last only as long as the express warranties stated above.
-
Page 26: Performance Checklist
PERFORMANCE CHECKLIST This checklist has been developed to assure proper installation of your appliance To validate your warranty you must mail or fax this form and a copy of your receipt to: Warranty Department, Prizer-Painter, 600 Arlington Street, Reading, PA 19611, Fax (610) 376-2596 Customer Information (Please Print) Product Information (Please Print) Name:________________________________________ Model No: ________________________________... - Page 27 PERFORMANCE CHECKLIST This checklist has been developed to assure proper installation of your appliance To validate your warranty you must mail or fax this form and a copy of your receipt to: Warranty Department, Prizer-Painter, 600 Arlington Street, Reading, PA 19611, Fax (610) 376-2596 Customer Information (Please Print) Product Information (Please Print) Name:________________________________________ Model No: ________________________________...
Need help?
Do you have a question about the BS-PL3024 and is the answer not in the manual?
Questions and answers