Magic Chef MCAF26MB Product Manual page 10

Magic Chef® Air Fryer Product Guide
9. The timer bell will go off to indicate when the cook time is complete. Pull the pan out and place
on a heat resistant surface.
Note: You can also switch off the appliance manually. To do this, turn the temperature
•
control knob to 0, or pull out the pan directly.
10. Check if the ingredients are ready. If the ingredients are not ready yet, simply slide the pan back
into the appliance and set the timer to a few extra minutes.
11. To remove small ingredients, press the basket release button and lift the basket out of the pan.
• Do not turn the basket upside down with the pan still attached to it, as any excess oil
that has collected on the bottom of the pan will leak onto the ingredients.
• After using the air fryer, the pan and food will still be hot. Depending on the type of the
food used in the air fryer, steam may escape from the pan.
12. Empty the basket into a bowl or onto a plate.
• Tip: To remove large or fragile ingredients, use a pair of tongs to lift the ingredients out
of the basket
13. When your first batch of food is finished cooking, the air fryer will instantly be ready for
preparing another batch. If you would like to shut it off, it will do so automatically after cooking
time is complete, or you can manually turn the time dial to zero.
1. Temperature Control Knob
2. Timer/Power-On Control Knob
3. Basket
4. Pan
5. Power-On Indicator
handle
6. Heating Indicator
Air Fryer Settings
The table found in this section of the manual will help you to select the basic settings for the ingredients
you want to prepare. Because the rapid hot air technology instantly reheats the air inside the appliance,
pulling the pan briefly out of the appliance during hot air frying barely disturbs the process.
7. Basket Release Button
8. Pan Handle
9. Air Intake
10. Air Outlet
11. Power Cable
10