Table of Contents
Advertisement
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button(s) to move the red frame pointer to
IMAGE ADJUST Menu icon.
Press POINT DOWN button to move the red frame pointer to the
2
item you want to adjust and then press SELECT button. The
level of each item is displayed. Adjust each level by pressing
POINT LEFT/RIGHT button(s).
Contrast
Press POINT LEFT button to decrease contrast, and POINT RIGHT
button to increase contrast. (From 0 to 63.)
Brightness
Press POINT LEFT button to adjust image darker, and POINT
RIGHT button to adjust brighter. (From 0 to 63.)
Color
Press POINT LEFT button to lighten color, and POINT RIGHT button
to deeper color. (From 0 to 63.)
Tint
Press POINT LEFT button or POINT RIGHT button to obtain proper
color. (From 0 to 63.)
White balance (Red)
Press POINT LEFT button to lighten red tone and POINT RIGHT
button to deeper tone. (From 0 to 63.)
White balance (Green)
Press POINT LEFT button to lighten green tone and POINT RIGHT
button to deeper tone. (From 0 to 63.)
White balance (Blue)
Press POINT LEFT button to lighten blue tone and POINT RIGHT
button to deeper tone. (From 0 to 63.)
Sharpness
Press POINT LEFT button to soften image, and POINT RIGHT
button to sharpen image. (From 0 to 15.)
Gamma
Press either POINT LEFT button or POINT RIGHT button to obtain
better balance of contrast. (From 0 to 15.)
Noise reduction
Press POINT LEFT/RIGHT button(s) to change noise reduction mode.
Dialog box display is changed to "On" to reduce noise (rough parts) of
image. Press POINT LEFT/RIGHT button(s) again, to change noise
reduction mode to off.
Progressive scan
Press POINT LEFT/RIGHT button(s) to change progressive scan
mode. Dialog box display is changed to "Off" and progressive scan
mode to off. Press POINT LEFT/RIGHT button(s) again, progressive
scan mode to on.
IMAGE LEVEL ADJUSTMENT
IMAGE ADJUST MENU
Move the red frame pointer
to the item to be selected
and then press SELECT
Press POINT LEFT/RIGHT buttons
to adjust value.
Press SELECT button at this icon to
display other items.
Press SELECT button at this icon to
display previous items.
Press POINT LEFT/RIGHT buttons
to adjust value.
Press SELECT button at this icon to
store value.
NOTE :
Tint can not be adjusted when video system is
PAL, SECAM, PAL-M or PAL-N.
Noise Reduction can not be operated when video
signal types and systems as follow.
Composite video signal (SECAM, NTSC4.43,
PAL-M and PAL-N systems).
S-video signal (SECAM, PAL-M and PAL-N
systems).
Component video signal.
Progressive can not be operated when "480p",
"575p", "720p", "1035i" or "1080i" is selected on AV
SYSTEM MENU (P31).
VIDEO INPUT
IMAGE ADJUST
Menu icon
33
Advertisement
Table of Contents
