Advertisement
FRONT & BACK PANEL FEATURES:
7
1. POWER SWITCH: Outlet switch activates protection and filtration to all outlets.
To turn the unit ON or OFF, press the upper or lower portion of this button.
2. Voltage LED Digital Screen
3. Dual USB Charge (5V/2A): Charge for Mobile-phone
4. 4 FRONT PANEL OUTLETS
5. 16 REAR PANEL OUTLETS: EMI/RFI Filtered, spike/surge protected and switched.
6. CIRCUIT BREAKER: Resettable 15 Amp thermal circuit breaker.
7. POWER CORD: Heavy duty 14-gauge power cord for connection to the
AC Power Mains (115V/60Hz).
INSTALLATION AND OPERATION
1. The Power Conditioners are the perfect accessories for any rack mount system.
Install in the top slot of a standard 19-inch rack, and the 4 Front and16 switched
AC outlets on the rear panel will provide full safety protection to al your rack
equipment. These conditioners protect your delicate electronic equipment by
combining a high voltage varistor surge and transient suppressor with an RFI/EMI
interference filter. The filter helps prevent noise from fluorescent lights, motors,
and similar sources of "electronic pollution" from contaminating the AC feed to
your senitive video, audio, vtr or computer circuits.
2. Plug Power Cord (7) into a standard grounded 120V outlet.
3. Plug sensitive electronic equipment into the 8 Rear Panel Outlets (4)
4. Turn Outlet Power Switch (1) to "ON" position. Lit LED indicates conditioned
power to the connected equipment.
4
www.PyleUSA.com
4
6
2
3
5
1
Advertisement
