Programmes; Washing; Switching Off - Bosch WAE244B1GB Instructions for Use, Programme Table Instruction Manual

Before washing for the first time
Wash once without any laundry -> page 9.
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load -> page 7.
Observe the important information -> page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Setting** and adjusting programmes
**If the
display panel, the childproof lock
rogramme selector
is active -> deactivate, page 5.
Additional functions and options
buttons –> Individual settings,
page 5.
All buttons are sensitive and need
only to be touched lightly. If the
buttons are held for longer, the
appliance automatically runs
through the setting options.
he model) or (with no final spin, laundry
- -)
or end (-0-)
d laundry –> page 4, 5
Measure accordingly:
1
symbol flashes in the
2
Press Start/Reload
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.

Washing

Detergent drawer with
compartments I, II,
Drum
Control panel
Washing machine
door
Service flap
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: Turn programme selector
to Drain or select the spin speed.
Choose Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models –> Refer to installation
instructions

Switching off

Turn the programme selector to Off.
End of programme when ...
... Start/Reload flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Choose Rinse.
3
– Press Start/Reload.
Programmes at lower temperatures:
– Choose Spin or Drain.
– Press Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press Start/Reload. The new programme starts from
the beginning.
Reloading laundry, if ...
... Press Start/Reload, both the symbols YES and +
are lit in the display panel. If NO is lit, the washing machine
door cannot be opened.
– Press Start/Reload.
–> page 5
4