H3C S5820V2 Mce Command Reference page 28

Field
MsgSent
OutQ
PrefRcv
Up/Down
State
# Display detailed information about BGP IPv6 peer 1::2 in the VPN instance vpn1.
<Sysname> display bgp peer ipv6 vpn-instance vpn1 verbose
Peer: 1::2
Type: EBGP link
BGP version 4, remote router ID 0.0.0.0
BGP current state: Connect
BGP current event: CRTimerExpired
BGP last state: Connect
Received: Total 0 messages, Update messages 0
Sent: Total 0 messages, Update messages 0
Maximum allowed prefix number: 12345
Threshold: 23%
Minimum time between advertisements is 30 seconds
Optional capabilities:
Multi-protocol extended capability has been enabled
Route refresh capability has been enabled
Peer preferred value: 0
Table 7 Command output
Field
Peer
Local
Type
remote router ID
BGP current state
Up for
BGP current event
BGP last state
Received
Sent
Maximum allowed prefix number
Description
Number of messages sent.
Number of messages to be sent.
Number of prefixes received.
Lasting time of the current BGP session state.
Current state of the BGP session between the local router and the peer.
Local: 1::3
Description
IP address of the peer.
Local router ID.
BGP connection type between the local router and the peer:
•
IBGP link—IBGP connection.
•
EBGP link—EBGP connection.
Router ID of the peer.
Current state of the BGP session between the local router and the peer.
Lasting time of the BGP session.
Current event of the BGP session between the local router and the peer.
Previous state of the BGP session.
Total numbers of received messages and updates.
Total numbers of sent messages and updates.
Maximum number of routes allowed to learn from the peer.
21