Table of Contents
Advertisement
Operations
08 Damp Alert
09 Drum Light
10 Adjust Time
11 Smart Care
12 Power
13 Start/Pause (Hold
to Start)
NOTE
Extremely tangled items finished by the washer may degrade the drying efficiency or
cause the door to open. We recommend that you untangle the items before drying.
Simple steps to start
1. Press Power to turn the dryer on.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Dryness,
Temp., and Time) as necessary.
4. Select desired options as necessary.
5. Press and hold Start/Pause (Hold to
Start).
34
English
Untitled-1 34
This alert is available all Sensor Dry cycles except for SANITIZE
and ACTIVEWEAR. Available dry levels are Normal, More, and
Extra.
If a load contains mixed fabrics, the Damp Alert indicator blinks
when average dryness of the item is 80 % dry. This lets you take
items that you don't want fully dried or that dry quickly out of
the dryer early while letting others continue to dry.
Press to turn on or off the interior lamp. The lamp stays lit for 2
minutes after it has turned on, and then turns off automatically.
You can change the set time in the Manual Dry cycles (QUICK
DRY, TIME DRY, AIR FLUFF, and WRINKLE RELEASE) and
WRINKLE AWAY. To change the cycle time, press
the desired time is displayed.
This function enables you to check the status of the dryer using
a smartphone.
Press to turn on/turn off the dryer.
Press to start or stop operation.
To change the cycle during operation
1. Press Start/Pause (Hold to Start) to stop
2. Select a different cycle, and repeat
3. Press and hold Start/Pause (Hold to
operation.
steps 2-4 above if necessary.
Start) again to start the new cycle.
or
until
11/22/2018 12:10:54 PM
Advertisement
Table of Contents
