Page 1
Internal Use Only LED LCD MONITOR SERVICE MANUAL CHASSIS : LM8CA MODEL : 27UL500 CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL. P/NO : (1901-REV00) MFL62449372...
ADJUSTMENT INSTRUCTION 1. Application 1.1 This document is applied to LM8CA chassis 27UL550 & 27UL500 LCD Monitor which is manufactured in Monitor Factory or is produced on the basis of this data. 1.2 Manufacturing Type: SET 2. Designation 2.1 The adjustment is according to the order which is designated and which must be followed, according to the plan which can be changed only on agreeing. 2.2. Power Adjustment: Free Voltage 2.3. Magnetic Field Condition: Nil. 2.4. Input signal Unit: Product Specification Standard 2.5. Reserve after operation: Above 5 Minutes (Heat Run) Temperature : at 25℃±5°C / Relative humidity: 65 ±10% / Input voltage: 100 ~ 240V, 50/60Hz 2.6. Adjustment equipments: Color Analyzer (CA‐210 or CA‐110), DDC Adjustment Jig equipment, ...
EXPLODED VIEW IMPORTANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and EXPLODED VIEW. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards.
Need help?
Do you have a question about the 27UL500 and is the answer not in the manual?
Questions and answers
internal led strip cat no. and vendors