Reverse Door Swing - Gorenje XWC660EF Instructions For Use Manual

Reverse door swing

Reverse door swing
- appliances without
decorative cover
Parts Included:
•
Top left case hinge
•
Bottom left case hinge
•
Left and right side decorative hinge cover
•
Decorative hinge screw hole cover
•
Key TORX No. 25
Tools Needed:
•
Phillips Screwdriver
•
Electric drill
Remove the door:
•
Remove the 2 screws and the toekick. Set aside
the screws and toekick for fi nal installation.
•
Remove 3 screws from the upper hinge with the
attached key.
•
Lift off the hinge (screws will be used to install the
new hinge).
•
Lift the door off the bottom case hinge.
•
Remove the bottom case hinge pin and bracket.
Rotate the door:
•
The handle will be on right side of the door,
hinges will be installed on the left side of the case.
•
Remove the door stop and cam riser on the
original bottom right side of the door.
•
Remove the fi ll plug on the top right side of the
door.
•
Turn the door over and reinstall the fi ll plug on the
new left side.
Reinstall the Door:
•
Install the original door stop and cam riser onto
the bottom left side of the door.
•
Install the new supplied bottom case hinge pin
and bracket onto bottom left side.
•
Place the door onto the bottom case hinge.
•
Install the supplied left-hand top case with the 3
original screws.
•
Select the hinge cover marked with an »L«.
•
Peel backing off the tape inside the decorative
19