Page 1
Owner’s manual BLUETOOTH AUDIO TRANSMITTER ®...
Page 2
Apple Computer, Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use ® ® of such marks by Clarion is under license. Other trademarks and trade names are those of their respective owners.
CONTENTS 1. WHAT IS INCLUDED IN THIS PACKAGE? ..........4 2. PRODUCT FEATURES OVERVIEW ............5 Clarion Bluetooth Audio Transmitter (DGL370) with iPod Cradle ® ® Support ....................5 3. SETTING UP ....................7 Setting Up DGL370 ................7 4. INTRODUCTION TO BLUETOOTH “PAIRING” .........10 ®...
1. WHAT IS INCLUDED IN THIS PACKAGE? A complete DGL370 package consists of the following items: Bluetooth Audio Transmitter ® Cigarette charger Transmitter and charger connecting cable (500mm) DGL370...
• iPod transmitter with Bluetooth wireless technology ® You can dock your iPod onto the Transmitter unit (used with iPod Cradle) and stream music directly from your iPod to your car stereo with Clarion Bluetooth ® Audio/Mobile-phone Transceiver for AUX Input (BLT370)²...
Page 6
Notes: ¹ iPod Cradle is an iPod docking base, which is one of the Clarion products (sold separately) that works best with DGL370 to provide wireless audio streaming capability for iPod. Cradle will be vary depends on iPod model. Please make sure you get the correct Cradle for your iPod.
Bluetooth Audio Transmitter ® The DGL370 is designed to work with iPod Cradle for ultimate wireless iPod playback support. Appropriate Cradle must be selected to hold different model of iPod. Please consult your local authorized Clarion dealer for the Cradle provided.
Page 8
Figure 2: Use the DGL373 with iPod and iPod Cradle (BC001N) * Illustration shown above is using the 1st generation of iPod nano, BC001N is not compatible with 2nd generation of iPod nano. Different iPod model will require a different Cradle. DGL370...
Page 9
2. Use an audio stereo cable to connect the output of external audio source to the input (2.5mm stereo jack) of the Transmitter. External audio source Transmitter (not included) 2.5mm stereo jack Audio stereo cable (not included) Figure 3: Use the DGL370 with alternative audio source DGL370...
® 1. Make sure the Transmitter is connected to an audio source. Please refer “Setting Up DGL370” on page 7. 2. Make sure the car stereo source mode is switched to “AUX” mode. 3. Set the Transceiver unit in pairing mode.
• If the Transceiver is switched off and on, it may require 20-30 seconds for the Transmitter to detect disconnection before re-connection. • Music streaming may be discontinued if the Transmitter and Transceiver are moved out of range of each other. DGL370...
• Use the switch to reset the unit. USB mini-B port • Use USB mini-B cable through this port to charge the Transmitter. 2.5mm audio jack input • Connect to external audio player. 14-pin outlet socket • Connect to iPod Cradle. DGL370...
Blink once every 5 sec Receiver connected, Blink dimly quickly Music streaming Battery Low Blink twice every 4 sec Charging Charging completed Notes: • “Blink” refers to the LED is blinking brightly. • “Blink dimly” refers to the LED is blinking not brightly. DGL370...
5. OPERATIONS FOR BLUETOOTH ® AUDIO TRANSMITTER Basic Operations Please make sure you have read through chapter “Setting Up DGL370” on page 7 before proceed to the following operations. For iPod/external audio player operations, please refer to your corresponding product owner’s manual.
Page 15
2. Connect the normal USB plug (Series A) to the computer USB port. USB plug (Series A) Transmitter USB mini-B plug • Via USB car cigarette charger adaptor (Included) 1. Remove the car cigarette lighter head from the socket. 2. Connect the USB car cigarette charger adaptor to the socket. DGL370...
Page 16
Music streaming is not affected. iii) Red LED remains ON. • After charging is completed, blue LED remains ON. • USB mini-B port is used for charging only, it cannot be used to transfer files to the iPod when used with iPod Cradle. DGL370...
• There is no volume control support from the analog output of 30-pin iPod connector interface. Changing the volume on the iPod through the “wheel” control will have no effect on the music streaming. • There is no remote control to external audio player that connected to Transmitter through 2.5mm audio jack input. DGL370...
6. COMPATIBLE MODELS Supported iPod Cradle models This Transmitter unit is specially designed to work with Clarion iPod Cradle. Different iPod models will require different type of iPod Cradle. Please consult your nearest Clarion dealer for more details. Supported other external audio player The audio player must be able to output audio to the 2.5mm audio jack input...
Transmitter, to the Cradle. streaming. (used Cradle and iPod. with iPod Cradle). Power off and power on the The AVRCP profile Transmitter to auto re-establish might not be connection. connected. DGL370...
Signal-to-Noise Ratio Analog in Line level (1 Vrms) Voltage 3.7V Max current 60mA Battery life (full running) ~8hr on 3.7v 500mAH polymer lithium ion battery Charging time ~2hr on 3.7v 500mAH polymer lithium ion battery Power source 4.5-6.5V DC DGL370...
• Do not drop, throw or try to bend the product as rough treatment could damage it. • Do not use any other accessories than Clarion originals intended for use with this product. Use of non-original accessories may result in loss of performance, damage to the product, fire, electric shock or injury.
Page 22
This can also reduce battery performance and/or shorten service life. • Do not use any chargers other than those recommended by Clarion. • Do not attempt to disassemble or modify the battery in any way. • Do not recharge the battery near a fire or in extremely hot conditions.