Table of Contents
Advertisement
Firmware Update
(4-25-2017)
We are pleased to offer this firmware update for the best possible
performance of your Onkyo Stereo Receiver. It can be installed via
Network or USB.
TX-8270
(Current Version
The 4/25/2017 update will address the following:
1. Adds support for Chromecast built-in.
a. Chromecast-enabled applications are required to enjoy
Chromecast built-in.
b. As part of setup, before starting to use Chromecast built-in,
you need to accept the PRIVACY POLICY on our smartphone
application "Onkyo Controller" (iOS/Android).
c. For more detailed instructions, please refer to below link:
http://www.onkyo.com/manual/sup/upd/chromecast_onk.pdf
2. Adds support for FireConnect.
a. This update will enable streaming from Network
Services/USB/Bluetooth/Music server.
b. Sampling rates of 44.1 kHz and 48 kHz are
supported.(USB/Music server)
c. Onkyo Controller App is required to enjoy FireConnect.
Minor bug fixes and performance improvements
3.
To check if your firmware is the latest version, go in to Setup -> Misc.
-> Firmware Update and check the version number. If any of the
numbers differ from the latest version available, please update your
unit.
Update via USB storage
Note: Please remove the wired/wireless connection before updating
through USB. Please prepare a USB storage device such as a USB
flash memory stick. You need at least 128 MB of available space to
update the firmware. Please unpack the ZIP file onto an empty USB
Stick that has been formatted with the FAT file system.
Onkyo TX-8270
1020-2000-0010-0008
)
Advertisement
Table of Contents
