RHYNO RHYNO3 Operator's Manual
  1. Manuals
  2. Brands
  3. RHYNO Manuals
  4. Power Tool
  5. RHYNO3
  6. Operator's manual

RHYNO RHYNO3 Operator's Manual

18v windshield cutter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NOTICE: This tool is specially designed to cut 0.500 inch (12.5 mm)
laminated glass only. Use of this product to cut materials other than
laminated glass may damage the tool and voids the warranty.
TO REDUCE THE RISK OF INJURY, USER MUST READ AND
UNDERSTAND OPERATOR'S
MANUAL.
RHYNO3 18V Windshield Cutter
-OPERATOR'S MANUAL - USA
Catalog No: RWC-3
[1]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RHYNO3 and is the answer not in the manual?

Questions and answers

Summary of Contents for RHYNO RHYNO3

  • Page 1 RHYNO3 18V Windshield Cutter -OPERATOR’S MANUAL - USA Catalog No: RWC-3 NOTICE: This tool is specially designed to cut 0.500 inch (12.5 mm) laminated glass only. Use of this product to cut materials other than laminated glass may damage the tool and voids the warranty.
  • Page 2 /min ……….. Per minute If you have any questions or comments bpm ………. Beats/min about this or any RHYNO tool, call us toll ipm …………. Inches/min free at: RPM ………… rotations/min sfpm ………. Surface feet/min 844-25RHYNO (844-257-4966) SPM ………..

  • Page 3: General Power Tool Safety

    Work Light Forward- Reverse Variable Speed Button Cutter Blades Trigger Switch Handle Fuel Gage Battery Release Button Belt Clip Battery Pack 1) WORK AREA SAFETY GENERAL POWER TOOL SAFETY a) Keep work area clean and well lit. WARNINGS Cluttered or dark areas invite accidents. WARNING! To reduce the risk of b) Do not operate power tools in explosive...

  • Page 4: Personal Safety

    b) Avoid body contact with earthed or finger on the switch or energizing the grounded surfaces such as pipes, power tools that have the switch on radiators, ranges and refrigerators. invites accidents. There is an increased risk of electric d) Remove any adjusting key or wrench shock if your body is earthed or before turning the power tool on.
  • Page 5 Power tools are dangerous in the hands Liquid ejected from the battery may of untrained users. cause irritation or burns. e) Maintain power tools. Check for 6) SERVICE misalignment or binding of moving Have your power tool serviced by a parts, breakage of parts and any other qualified repair person using only condition that may affect the power...

  • Page 6: Important Safety Instructions For All Battery Packs

    Your tool uses a • Copper and plastic from wiring RHYNO charger. Be sure to read all safety Your risk from these exposures varies, instructions before using your charger. depending on how often you do this type of Consult the chart at the end of this manual work.
  • Page 7 If medical attention is needed battery electrolyte RHYNO Battery Packs or tools include a fuel composed of a mixture of liquid organic gage which consists of three green LED carbonates and lithium salts. lights that indicate the level of charge •...

  • Page 8: Important Safety Instructions For All Battery Chargers

    • These chargers are not intended for any • Do not place any object on top of the uses other than charging RHYNO charger or place the charger on a soft rechargeable battery packs. Any other surface that might block the ventilation...

  • Page 9: Charging A Battery Pack

    Remove the battery pack from the tool • The charger is designed to operate on for charging when needed. RHYNO standard 120V/220V household Lithium-ion battery packs do not electrical power. Do not attempt to use develop “memory”...

  • Page 10: Assembly And Adjustments

    flammable or combustible solvents around batteries, charger or tools. 4) REPAIRS The charger has no serviceable parts. Hot/Cold Battery Pack Delay When the charger detects a battery pack that is too hot or too cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the batty pack has reached an appropriate temperature.

  • Page 11: Variable Speed Trigger Switch

    This is normal and INTENDED USE does not indicate a problem. The RHYNO Windshield Cutter is designed Work Light to cut laminated glass or film-covered glass like vehicle or building windows with a The work light is located on the foot of the thickness of up to 0.750 inches (19.5 mm).

  • Page 12: Operation

    and firmly pull the battery outward from the glass hole and activate the trigger handle. switch to begin cutting. 6. Ensure tool is positioned with glass Align the battery pack with the rails of the parallel to the angle tool on the shear tool’s handle and slide it firmly into the head while cutting.

  • Page 13: Maintenance

    WARNING! Since accessories, other provided, to accommodate left- or right- than those offered by RHYNO, have not handed users. If the hook is not desired at been tested with this product, use of such all, it can be removed from the tool.

  • Page 14: Register Online

    NOTE: Battery warranty voided if the battery pack is tampered with in any • WARRANTY SERVICE: Registering your way. RHYNO and We Cut The Glass, LLC product will help you obtain more efficient are not responsible for any injury caused...
  • Page 15 THIS PAGE INTENTIONALLY LEFT BLANK. [15]...

  • Page 16: Limited Warranty

    (2) years after the date of purchase unless otherwise noted. Return of the tool to a RHYNO factory service center location, freight prepaid and insured, is required. A copy of the proof of purchase should be included with the return product.

This manual is also suitable for:

Rwc-3

Table of Contents