Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nissin Digital Di700A
Summary of Contents for Nissin Digital Di700A
- Page 1 for Fujifilm cameras INSTRUCTION MANUAL...
-
Page 2: Compatible Cameras
TTL operation. SPECIAL FEATURES The Di700A features the use of a selector dial to quickly move through all settings and can be easily operated by one finger-tip. The Di700A with wireless flash shooting using Nissin Air System/ radio transmission. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS These safety instructions refer to important information on how to use this product safely and properly. Please read the following instructions before using the product. WARNING This symbol refers to the possibility of personal injury, death or property damage if not followed as described. -
Page 4: Names Of The Components
Names of the Components Flash stand Accessories: Flash stand, Pouch... -
Page 5: Basic Operation
Basic Operation Inserting batteries Usable batteries - Alkaline batteries, Lithium batteries or NiMH batteries. 1. Remove the battery magazine and insert 4 x size AA batteries as shown in the picture. 2. The battery compartment is specially designed so that every battery is placed in the same direction to avoid confusion in poor lighting conditions. - Page 6 Di700A again, press the camera’s shutter button halfway or press any button of the flash unit. In case Di700A is not in use for over 60 minutes, the unit is completely turned off. To turn on Di700A again hold On/Off switch for 1 second.
- Page 7 Make sure that the mounting foot will lock (with a “click”) when it has been inserted completely. Removing Di700A from the camera Press the unlock button and slide the mounting foot of Di700A off the hotshoe of the camera. ...
-
Page 8: Menu Screen
In a few seconds, the Pilot button turns green. The Di700A is ready to shoot. For a test flash, press the Pilot button. When using the test flash as an open flash, please note that the reference guide number in this case is G.No.10 (ISO 100). - Page 9 (Aperture priority AE), (Shutter priority AE) or (Manual Exposure); In all of the camera's shooting modes listed above, Di700A will fully work in TTL automatic-flash system. Set Di700A to the camera’s hotshoe and press the on/off switch to power on.
- Page 10 Set the camera’s shooting mode, select focal length and take pictures with Di700A on your camera. Di700A is a supplement to help you in taking a creative and live picture. Almost all tasks are automatically done by the camera and you just control the camera only.
- Page 11 When setting the TTL flash power compensation on your camera, any compensation which is also set on the Di700A will be counted in addition to the compensation you selected in the camera’s menu mode. ( i.e. Having a +1 compensation set on the flash and a +1.3 compensation set in...
- Page 12 You can set Di700A for non-automatic flash mode, and select the desired flash power from 8 different levels Set Di700A to the camera’s hotshoe and press the on/off switch to power on. Rotate the dial to “M” mode then press the Set button.
- Page 13 Wireless Remote Flash Di700A has a wireless remote flash system as a slave unit. You can enjoy creative flash photography with multiple lightings from the various directions. 3 slave modes are provided, Slave Digital (SD) for digital pre-flash system; Slave Film (SF) for analogue flash system.
- Page 14 Wireless Remote Flash Wireless Remote - Radio Transmission (NAS) Using Di700A with a NAS shooting function makes it easy to shoot with advanced wireless multiple flash lighting, in the same way as normal autoflash shooting. Once Di700A linked to NAS, function are control directly by the NAS master.
- Page 15 Setting slave flash Di700A Switch Di700A on and while the ready lamp is on, rotate the dial and press Set button to select desired mode. When flash is set to SD or SF mode, the of flash power level is indicated by the lighted LED’s.
- Page 16 60 minutes. The zoom setting position is automatically set for the focal length of 35mm while using Di700A as a slave unit. To reset the flash unit to another mode, press the mode select button for TTL...
- Page 17 Fill-in flash and Light diffusing panel For short distance or portrait flash photography, if the light is not too sharp or too strong to the subject. Use fill-in reflector flash or diffuse the light. If the subject is close (within 2 meters), turn the flash head 90°...
-
Page 18: Bounce Lighting
When the flash head stays at turning or tilting position, the zoom setting position of Di700A is automatically set at the position for a 50mm focal length lens. The wall or ceiling in this case should be a flat surface and white color is preferable. - Page 19 0.8 seconds Sony FA-EB1AM about 3.8 seconds Di700A Fujifilm version uses a Fujifilm version power pack socket. User can purchase an external Nissin power pack PS8 for Sony to enjoy faster recycle time. Di700A is automatically turned off when repeating flash continuously over 20 to 30 times to protect the flash circuitry from overheating.
- Page 20 Flash Power Lock When the back ground of the main subject is too bright, the camera’s exposure reading system adjusts the flash light intensity for such back ground condition and it results in the main subject being underexposed. Or in case the main subject is not placed in the center of the viewfinder, the flash picture may result in the aimed targeted subject being under or over exposed.
-
Page 21: Specifications
Specifications Type Fujifilm Guide no. (at ISO 100 in m) GN60 (at 200mm zoom head position)/ GN27 (at 35mm zoom head position) Focal length coverage 24 - 200mm (16mm when using built-in diffuser) Power Source 4 x LR6 batteries (Size AA Ni-MH or lithium batteries usable) Battery loading system Quick loading –... -
Page 22: Troubleshooting
Guide Numer table Guide No. at manual exposure mode (ISO 100 in meters) Flash Power Level Zooming Position Full 1/16 1/32 1/64 1/128 24mm 28mm 35mm 50mm 70mm 85mm 105mm 135mm 200mm Trouble Shooting The flash unit does not start charging. Batteries are not correctly installed Install batteries to correct direction. -
Page 23: Warranty
Warranty In case of the following reason of the defect, it may void the warranty. Please refer the respective warranty condition for details which depends on the country of purchase. 1. The product is not used in accordance with the instruction of the owner’s manual. - Page 24 Nissin Japan Ltd., Tokyo http://www.nissin-japan.com Nissin Marketing Ltd., Hong Kong http://www.nissindigital.com Design and Specifications are subject to change without prior notice. 700AFJV1...