Related Manuals for Portwell WEBS-5482-W
Summary of Contents for Portwell WEBS-5482-W
- Page 1 WEBS-5482-W Fan-less Embedded System User's Manual Version 1.0 Copyright © Portwell, Inc., 2015. All rights reserved. All other brand names are registered trademarks of their respective owners.
-
Page 2: Table Of Contents
Preface Table of Contents How to Use This Manual Chapter 1 System Overview ....................... 1-1 1.1 Introduction ....................... 1-1 1.2 Check List ......................1-2 1.3 Product Specification ..................1-2 1.4 Mechanical Dimension ..................1-3 Chapter 2 System Installation ....................2-1 2.1 HDD Installation .................... -
Page 3: How To Use This Manual
Preface How to Use This Manual The manual describes how to configure your WEBS-5482-W system to meet various operating requirements. It is divided into five chapters, with each chapter addressing a basic concept and operation of Fan-less Embedded System. Chapter 1: System Overview. Present what you have in the box and give you an overview of the product specifications and basic system architecture for this fan-less embedded system. -
Page 4: Chapter 1 System Overview
WEBS-5482-W is rated IP40 and certified by industrial product quality tests, such as an anti-vibration test of up to 5Grms and an anti-shock test of 50G. Portwell’s WEBS-5482-W has proven itself to be a perfect solution for video/graphics-demanding and automation control systems. -
Page 5: Check List
System Overview power-source flexibility enables product usage in a variety of situations. Moreover, the WEBS-5482-W is more than a robust and dependable Box PC system with high performance and graphics efficacy. Its stylish mechanical design enhances the system’s artistry. Potential applications include POS, kiosk and digital signage and transportation, etc. -
Page 6: Mechanical Dimension
50G, 11 msec, IEC 60068-2-27 Mechanical Dimension (WxDxH) 255 x 187 x 86 mm; 10” x 7.3” x 3.3” Weight 5 kg Mounting Wall Mount 1.4 Mechanical Dimension Front view of the WEBS-5482-W system Rear view of the WEBS-5482-W system WEBS-5482-W User’s Manual... - Page 7 System Overview Top view of the WEBS-5482-W system Side view of the WEBS-5482-W system WEBS-5482-W User’s Manual...
-
Page 8: Chapter 2 System Installation
Step 1. Loosen the thumbscrews of the Step 2. Draw out the HDD tray from HDD cover the system Step 3. Install the HDD into tray with Step 4. Push the HDD tray back screws Step 5. Tighten the thumbscrews and finish installation WEBS-5482-W User’s Manual... -
Page 9: Cfex Installation
System Installation 2.2 CFEX Installation CFEX is a new Compact Flash (CF) technology initiated by Portwell and adapting legacy CF type one with advanced pin definitions. This helps overcome reliability issues with standard commercial memory. CFEX also supports SATA 3.0, SPI and other extensions, and achieves a read speed of 100 to 120Mbyte/s and write speed of 45 to 75Mbyte/s. - Page 10 *Note: Image of the expansion card is for reference only. Step 9. Install the module back to the Step 10. Finish the installation system and screw it Add-on card dimension limitation: Max dimension of add-on card in WEBS-5482-W is 157 x 111 mm. WEBS-5482-W User’s Manual...
-
Page 11: I/O Interfaces
System Installation I/O Interfaces 2.4.1 Front View ANT1 & ANT2 hole: Antenna holes for WiFi or 3G/GPS module 2.5" HDD/SSD Tray: One removable 2.5" HDD/SSD trays for storage installation WEBS-5482-W User’s Manual... -
Page 12: Rear View
Press the power button to turn ON/OFF the system CFEX: CFEX is a new Compact Flash (CF) technology initiated by Portwell and adapting legacy CF type one with advanced pin definitions. This helps overcome reliability issues with standard commercial memory. CFEX also supports SATA 3.0, SPI and other extensions, and achieves a read speed of 100 to 120Mbyte/s and write speed of 45 to 75Mbyte/s. - Page 13 *Note: RS-232/422/485 configuration is determined by BIOS setting. Check BIOS setting for details. PIN No. Signal Description DCD#/DT- RXD#/DT+ TXD#/422R+ DTR#/422R- DSR# RTS# CTS# RS-232 – COM2, COM3, COM4 PIN No. Signal Description DCD# RXD# TXD# DTR# DSR# RTS# CTS# WEBS-5482-W User’s Manual...
-
Page 14: Getting Started
(12~24V) is connected properly on the system *Note: Please connect the power *Note: Power LED shines BLUE when supply only either “Terminal block” system is “ON”; ORANGE when “OFF” or “DC Adaptor”. Don’t connect to both at the same time. WEBS-5482-W User’s Manual... -
Page 15: Chapter 3 Bios Setup Information
Chapter 3 BIOS Setup Information WEBS-5482-W system adopts PEB-5731-W mother board. PEB-5731-W uses AMI BIOS structure stored in Flash ROM. These BIOS has a built-in Setup program that allows users to modify the basic system configuration easily. This type of information is stored in CMOS RAM so that it is retained during power-off periods. -
Page 16: Main
System Date The date format is <Day>, <Month> <Date> <Year>. Use [＋] or [－] to configure system Date. System Time The time format is <Hour> <Minute> <Second>. Use [＋] or [－] to configure system Time. Access Level WEBS-5482-W User’s Manual... -
Page 17: System Setup Utility
Configure boot device priority settings. Security Configure user authentication requirements. Save changes and exit the system setup utility, or Save & Exit restore default settings. 3.4 Configuration Use this menu to set up the items of special enhanced features. WEBS-5482-W User’s Manual... - Page 18 CPU C states CPU C states -Enabled ★ Default -Disabled Enhanced C1 state Enhanced C1 state -Enabled ★ Default -Disabled CPU C3 report CPU C3 report -Enabled ★ Default -Disabled CPU C6 report CPU C6 report -Enabled ★ Default WEBS-5482-W User’s Manual...
- Page 19 It is not necessary to make any change just take the default value. BIOS Item Usage Item-Specific Help -Disabled High Precision Timer -Enabled★ Default -Disabled Azalia -Enabled★ Default -Disabled ★ Default Enabled/Disabled VT-d VT-d function on MCH -Enabled -LPC Bus Port 80h Redirection -PCIE Bus WEBS-5482-W User’s Manual...
- Page 20 BIOS Setup Information AMT Configuration BIOS Item Usage Item-Specific Help -Disabled Disables/Enabled iAMT Intel AMT -Enabled ★ Default function -Disabled ★ Default Un-Configure ME -Enabled -Disabled ★ Default Disable ME -Enabled WEBS-5482-W User’s Manual...
- Page 21 BIOS Setup Information Memory Configuration WEBS-5482-W User’s Manual...
- Page 22 Enable/Disable Intel Intel LAN I218 Controller -Enabled ★ Default LAN I218 -Disabled ★ Default Wake on LAN -Enabled -Disabled Enable/Disable Intel Intel LAN I210 Controller -Enabled ★ Default LAN I210 -Disabled ★ Default Wake on LAN -Enabled WEBS-5482-W User’s Manual...
- Page 23 -256MB ★ Default Aperture Size Select the Aperture Size -512MB -32M -64M -96M Select DVMT 5.0 -128M Pre-Allocated (Fixed) -160M DVMT Pre-Allocated Graphics Memory size -192M used by the internal -224M Graphics Device -256M ★ Default -288M WEBS-5482-W User’s Manual...
- Page 24 Internal -MAX Graphics Device -VBIOS Default -HDMI Primary IGFX Boot -DVI ★ Default Display -VBIOS Default -HDMI ★ Default Secondary IGFX Boot Display -DVI -1024x768 ★ Default -1280x1024 DVI Display Type -1360x768 -1920x1200 WEBS-5482-W User’s Manual 3-10...
- Page 25 -192 PCI Bus Clocks -224 PCI Bus Clocks -248 PCI Bus Clocks -Auto -128 Bytes -256 Bytes Maximum Payload -512 Bytes -1024 Bytes -2048 Bytes -4096 Bytes -Auto -128 Bytes Maximum Read Request -256 Bytes -512 Bytes -1024 Bytes WEBS-5482-W User’s Manual 3-11...
- Page 26 BIOS Setup Information -2048 Bytes -4096 Bytes PCH PCI Express Configuration It is not necessary to make any change just take the default value. WEBS-5482-W User’s Manual 3-12...
- Page 27 Control PCI Express root -Enabled ★ Default 1/2/4/6 port -Disabled ★ Default -L0S Control PCIe Active State ASPM Power Management setting -L0S L1 -Auto -Auto ★ Default Select PCIe Speed to Gen1 PCIe Speed -Gen1 or Gen2 -Gen2 WEBS-5482-W User’s Manual 3-13...
- Page 28 SATA Controller Speed -Gen2 -Gen3 ★ Default -Disabled Port 0~3 -Enabled ★ Default -Disabled ★ Default Hot Plug -Enabled -Disabled ★ Default External SATA -Enabled -Hard Disk Drive -Solid State Drive ★ SATA Device Type Default WEBS-5482-W User’s Manual 3-14...
- Page 29 -Enabled ★ Default Legacy USB support USB devices are connected. -Disabled DISABLE option will keep USB devices available only for EFI applications. -Smart Auto ★ Default -Auto XHCI Mode -Enabled -Disabled Manual -Enabled ★ Default XHCI Hand-off -Disabled WEBS-5482-W User’s Manual 3-15...
- Page 30 -Disabled★ Default -Enabled ★ Default Mass Storage Driver Support -Disabled PCH USB Configuration -Disabled ★ Default Control each of the USB -USB Ports per-Port 0~7 ports disabling -Enabled Disable PCH USB Configuration USB Ports per-Port 0~7 WEBS-5482-W User’s Manual 3-16...
- Page 31 -Last State Enable or disable System wake on alarm event. -Disabled ★ Default Wake system with Fixed When enabled, System Time -Enabled will wake hr:min:sec specified -Disabled ★ Default Wake on Ring -Enabled WEBS-5482-W User’s Manual 3-17...
- Page 32 BIOS Setup Information TPM Configuration BIOS Item Usage Item-Specific Help -Disabled ★ Default Enabled/Disabled TPM Security Device Support Function -Enabled Super IO Configuration Enable/Disable Watch Dog Timer WEBS-5482-W User’s Manual 3-18...
- Page 33 -Disable ★ Default WDT Controller -Enabled - Second ★ Default Timer Unit - Minute 20 ★ Default Timer value -Disable Serial Port 1~6 Setting Serial Port 1~6 -Enable ★ Default -RS-232 RS-232/422/485 Control -RS-422 Option -RS-485 WEBS-5482-W User’s Manual 3-19...
- Page 34 Provide on board sensor reading information. BIOS Item Usage Item-Specific Help -Disable ★ Default CPU Smart Fan Control -Enable Smart Fan Start Disable / Enable Smart -50 ★ Default Temperature Fan function Smart Fan Full Speed -50 ★ Default Temperature WEBS-5482-W User’s Manual 3-20...
- Page 35 BIOS Setup Information Serial Port Console Configuration Configure console redirection on serial port. BIOS Item Usage Item-Specific Help Control Console -Disabled ★ Default Serial Port 1 Console Redirection Redirection -Enabled enable/disable -Disabled ★ Default Console Redirection -Enabled WEBS-5482-W User’s Manual 3-21...
-
Page 36: Boot
POST. When set to [Force BIOS], the display mode used by AMI BIOS is used. Select [Keep Current] if you want to use the display mode of optional ROM. Choices: Force BIOS, Keep Current. WEBS-5482-W User’s Manual 3-22... - Page 37 Choices: Disabled, Enabled. Summary Screen Choices: Disabled, Enabled. Fast Boot Choices: Disabled link, Enabled. Boot mode Select Choices: LEGACY, UEFI. Boot Option #1 ~#7 Sets the system boot order. Choices: Built-in EFI Shell, other bootable devices, Disabled. WEBS-5482-W User’s Manual 3-23...
-
Page 38: Security
BIOS Setup Information 3.6 Security Set or clear the Supervisor account’s password. Administrator Password Set Setup Administrator Password User Password Set User password WEBS-5482-W User’s Manual 3-24... -
Page 39: Exit
Finally resets the system automatically. Save Changes and Exit Exit system setup after saving the changes Discard Changes and Reset Reset the system without saving the changes. Restore Defaults Restore/Load Default Values for all the setup options. WEBS-5482-W User’s Manual 3-25... -
Page 40: Chapter 4 Important Instructions
4.2 Exclusion of Accident Liability Obligation Portwell, Inc. shall be exempt from the statutory accident liability obligation if users fail to abide by the safety instructions. 4.3 Liability Limitations / Exemption from the Warranty Obligation In the event of damage to the system unit caused by failure to abide by the hints in this manual and on the unit (especially the safety instructions), Portwell, Inc. -
Page 41: Chapter 5 Frequent Asked Questions
LVDS signal by Chrontel Ch7036-Chip. And the Chrontel Ch7036-Chip supports display resolution 1024x768 only. It’s the design limitation. Q2: Why cannot detect the CFEX or mSATA device in BIOS or OS? Answer: Solution1) Please update the BIOS to the latest version.(After version R1.00.E3) WEBS-5482-W User’s Manual... - Page 42 Step1: Set Launch Storage OpROM as Enabled. Step 2: In Configuration page, please set the Port 2 (CFEX), Port3 (mSATA) as Enabled. And then save the changes and restart the system. It can detect the CFEX and mSATA properly now. WEBS-5482-W User’s Manual...
- Page 43 Important Instructions WEBS-5482-W User’s Manual...
Need help?
Do you have a question about the WEBS-5482-W and is the answer not in the manual?
Questions and answers