Table of Contents
Advertisement
Adjusting the angle of the TV to suit view
(Only 32/42CS41**, 32/42LS31**)
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20
CAUTION
y When adjusting the angle of the product,
watch out for your fingers.
» Personal injury may occur if hands or fingers
y
are pinched. If the product is tilted too much, it
may fall, causing damage or injury.
Securing the TV to a table
(Only 32/42LS31**, 26/32/42CS41**, 32LS33**)
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
WARNING
y To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
ASSEMBLING AND PREPARING
Securing the TV to a wall
(This feature is not available for all models.)
20
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
y Make sure that children do not climb on or
hang on the TV.
NOTE
y Use a platform or cabinet that is strong and
large enough to support the TV securely.
y Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
19
Advertisement
Table of Contents
