en
Note
If the appliance is placed on its back,
ensure that the wall spacer is not fitted.
Changing the door
handle
(if required)
Installation in numerical sequence.
Attached handle
Fig. "
Internal handle
Fig. #
Fitting the wall spacer
Fit wall spacers to obtain the indicated
energy rating of the appliance.
A reduced wall gap will not restrict the
function of the appliance. The energy
rating may then increase slightly.
4
Aligning the appliance
Place the appliance in the designated
location and align. The appliance must
be level. If the floor is uneven, use the
front height-adjustable feet. Adjust the
height-adjustable feet with a wrench.
Note
The appliance must be upright. Please
align it with a spirit level.