Table 41 Tightening Torque (72011) - ABB HT562381 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting Page 94 / 115
Installing the compressor casing
Figure 47: Installing the compressor casing
Part number A130 A135 A140 A145
72011 M8 M10 M12 M12
35 Nm 70 Nm 105 Nm 105 Nm
Table 41: Tightening torque (72011)
Always replace the O-ring (42012) (see chapter Spare parts).

1. Thoroughly clean the fastening strips (72012) before assembly.
2. Attach swivel lifting eyes (01) to the compressor casing (72000) and lifting gear.
3. Install the compressor casing (72000).
4. Install the fastening strips (72012) with screws (72011).
© Copyright 2015 ABB. All rights reserved. HZTL4031_EN Revision C February 2016