Pairing A Bluetooth Device - Precision PA1230B User Manual

PAIRING A BLUETOOTH DEVICE

1. Turn on you Bluetooth device.
2. Turn on the speaker to Bluetooth. the unit will automatically go into pairing
mode to search for Bluetooth device. You will know you are in pairing mode
when the LED is flash quickly.
3. If your Bluetooth device is not able to pair to the unit, disconnect the unit's
previous Bluetooth connections and reset the Bluetooth module by holding
play key.
4. Navigate to your Bluetooth device's setup screen, find "PA1230B" and
connect.
5. Bluetooth indicator light will light up solid when connected.
6. To disconnect pairing,
Note: You can connect with a smart phones or tablet PC with Bluetooth.
BATTERY
.
1 This unit is a battery powered PA loudspeaker. Be sure that you have
completely charged the battery prior to first use to maximize the battery's
lifespan. The unit takes approximately 2 hours to fully charge. The unit will
automatically begin charging once the power cord is connected to a power
source and the power switch is better set to off.
The unit will also power on when connected to an AC power source even if
the battery power is low. When connected to a power source, the unit will
play while also charging the battery slowly.
.
2 Upon completion of the charging, please disconnect the power cable.
.
3 With standard usage, a fully charged battery can play for about 2.5 hours.
.
4 Battery can be recharged about 300 times in its life time.
.
5 When not in use, the speaker should always be set to OFF to prevent the unit
from draining the battery.
When the unit is not used for prolonged periods of time, the battery will
gradually lose its power. It is recommended to fully charge the battery
regularly.
hold PLAY/PAUSE button
7
.